Abstract:The continuous miniaturization and integration of pixelated devices have become a main trend in the field of display. Micro light-emitting diode (micro-LED) display is composed of an array of LEDs that are sub-50-micrometers in length. It has huge advantages in brightness, resolution, contrast, power consumption, lifetime, response speed and reliability compared with liquid crystal display (LCD) and organic LED (OLED) display. Consequently, micro-LED display is regarded as the next-generation display technology with high potential applications, such as virtual reality (VR), augmented reality (AR), mobile phones, tablet computers, high-definition TVs and wearable devices. Currently, the combination of commercial 5G communication technology with VR/AR display, ultra high definition video technologies will further prompt the development of micro-LED display industry. However, some basic scientific and technological problems in micro-LED display remain to be resolved. As the chip size shrinks to below 50 mu m, some problems that are not serious for large-sized LEDs appear for micro-LEDs. These problems include crystalline defects, wavelength uniformity, full-color emmision, massively tranferring and testing, etc. In the past two decades, various solutions to those problems have been proposed, which have greatly promoted the progress of micro-LED display. In this paper, an overview of micro-LED display since 2000 is given firstly, which includes the main research results and application achievements. Secondly the issues involved in the wafer epitaxy and chip process of micro-LEDs and possible solutions are discussed based on the display application in detail. The surface state induced by the dangling bonds and dry etching damages are concerned for the nonradiative recombination at a low injection level. The remedies are provided for those surface states, such as atomic-layer deposition and neutral beam etching. Some methods to reduce the threading dislocation and suppress the polarization field are summarized for micro-LED epitaxial growth. Moreover, the GaN-based LEDs on Si (100) substrate are also introduced for the future integration of micro-LEDs into the Si-based integrated circuits. As to the wavelength uniformity, the MOCVD equipment and growth technology including the laser treatment are discussed. In the chip processing part, the full-color display, mass transfer and effective inspection technology are discussed. Assembling RGB individual LEDs, quantum dot phosphor material and nanocoloumn LEDs are different routes for full-color display. Their trends in the future are provided. The pick and place, laser lift-off technologies, are strengthened in the massively transferring for micro-LEDs. In the massively and rapidly inspection technologies, the photoluminscence combined with Raman scattering, the electroluminescence combined with digital camera are discussed. Finally, the summary and outlook in these issues are also provided.

The Research Progress of High-performance & High-power LED: 973 Program "Research on Critical and Fundamental Problems of High Performance LED Manufacture and Equipment" Introduction of Proiect Achievements

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Study on Fabrication Techniques and Photodectric Properties of PDP Surface Light Source

Direct Design of Thin and High-Quality Direct-Lit LED Backlight Systems

New Progress in wafer epitaxy technologies for high-brightness white LEDs

Unusual Strategies For Using Indium Gallium Nitride Grown On Silicon (111) For Solid-State Lighting

Challenges of high-yield manufacture in micro-light-emitting diodes displays: chip fabrication, mass transfer, and detection

Optimization design of irradiance array for LED uniform rectangular illumination.

(Invited, Digital Presentation) High-Efficiency and Stable Perovskite LEDs and Displays with Nanophotonic Methods

Research Progress of Composition and Structure Design in Perovskites for High Performance Light-emitting Diodes

High Performance Metal Halide Perovskite Light-Emitting Diode: From Material Design to Device Optimization

A review of key technologies for epitaxy and chip process of micro light-emitting diodes in display application

Research on a novel surface lamp-house based on AC-PDP principle

Recent progress in surface modification and interfacial engineering for high-performance perovskite light-emitting diodes

Improving the Operational Lifetime of Metal-Halide Perovskite Light-Emitting Diodes with Dimension Control and Ligand Engineering

Research Progress of Micro-LED Display Technology

Research on Failure Mechanism of the Phosphors and Sealants for White Light Emitting Diode Package

Optical Simulation Design of Novel Spherical LED Device with Wide Beam Angle and High Uniformity

High‐Throughput Combinatorial Optimizations of Perovskite Light‐Emitting Diodes Based on All‐Vacuum Deposition

Improved Performance Of Gainn Based Deep Green Light Emitting Diodes Through V-Defect Reduction

Design and Implementation of Photovoltaic Lighting System with High Luminous Efficacy LEDs