Abstract:Considering the inherent advantages of the Light Emitting Diode (LED) in the field of illumination, this work designs an intelligent supplementary lighting system using LED as the light source. Combining microcontroller and electronic circuit theory, the circuit is built with the microcontroller PIC16F873 as the core control chip. The system utilizes an external 220 V AC-20 V DC conversion power supply, hence operating on a 20 V DC power source. The system consists of four hardware parts: the onboard power supply uses TI-produced TPS54331 as the control chip to achieve voltage conversion; the external signals (flashing and burst flashing signals) are isolated from the microcontroller through an optocoupler circuit; the PWM pulses output from the microcontroller’s RC1/CCP2 pins drive the corresponding switching tubes to achieve the flashing function; the flashing synchronization signal is output externally after optocoupler isolation, and its synchronous output with the flashing signal is achieved through an optocoupler after LED conduction; the circuit is established using TI-produced differential bus transceiver SN65LBC184D to convert the external 485 differential signal to the level signal required by the microcontroller. In the experiment, after completing the hardware design, connecting the LED panel, and debugging the test program, it is found that the designed lighting system has a good supplementary lighting effect. According to the PWM output waveform, the flashing effect meets the design expectations. The Hadoop big data computing platform is introduced. Simulation testing reveals that under no backlight conditions, the system achieves an illumination intensity of around 20 klx at a distance of about 10 meters. With backlight conditions, the system maintains an illumination intensity of around 1.5 klx at a distance of about 10 meters. Further calculations are performed to analyze the variation in foot traffic within the test area’s illumination over 24 hours. The total illumination intensity during different time intervals is compiled, confirming that the system can autonomously adjust the illumination intensity of the area based on changes in foot traffic.

Design and Implementation of Photovoltaic Lighting System with High Luminous Efficacy LEDs

Design and Implementation of the High Efficiency Photovoltaic System with Solid State Lighting

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Study of Energy Efficient with Intelligent Traffic and Illuminating Control System

Energy Saving Intelligent LED Lighting System Design for Indoor Lighting

Solar System for Lighting Based on High Brightness LED

Research of Solar Energy System For Lighting

Implementation of a stand-alone photovoltaic lighting system with maximum power point tracking and high pressure sodium lamp

A NOVEL ENERGE MANAGEMENT AND CONTROL FOR STAND-ALONE PHOTOVOLTAIC LIGHTING SYSTEM

Design PV-fed LED streetlight using Soft-Switching bidirectional DC-DC converter with optimal flux control

Stand-alone LED lighting system powered by PV and battery: electrical overall performance analysis of a case study

LEDs: A Promising Energy-Saving Light Source for Road Lighting

A Intelligent Energy Saver for Lighting System with a Novel Converter Circuit Topology

Implementation of solar LED lighting control system based on embedded target modules

Conceptual Design of Dedicated Road Lighting for City Park and Housing Estate

An Intelligent Controller of LED Street Light Based on Discrete Devices

Intelligent Light Emitting Diode Flashing Supplementary Lighting Control Design and Its Big Data Illumination Analysis

Design of LED Road Lighting Lantern Control System Based on Power Line Carrier Communication Technology

Superior Application of LED to Street Lighting

Self‐powered HP‐LED intelligent energy management system with adaptive brightness adjustment

Design of Energy-Saving Control System for LED Street Lamps