Abstract:The harm of heavy metals contained in electronic and electrical equipment (EEE) on environment is of high concern by human. Aiming to handle the great challenge of RoHS compliance, the determinations of trace or ultratrace chromium (Cr), cadmium (Cd), mercury (Hg) and lead (Pb) by inductively coupled plasma optical emission spectrometry (ICP-OES) was performed in the present paper, wherein, microwave extraction technology was used to prepare the sample solutions. In addition, the precision, recovery, repeatability and interference issues of this method were also discussed. The results exhibited that using the microwave extraction system to prepare samples is more quick, lossless, contamination-free in comparison with the conventional extraction methods such as dry ashing, wet-oven extraction etc. By analyzing the recoveries of these four heavy metals over different working time and wavelengths, the good recovery range between 85% and 115% showed that there was only tiny loss or contamination during the process of microwave extraction, sample introduction and ICP detection. Repeatability experiments proved that ICP plasma had a good stability during the working time and the matrix effect was small. Interference was a problem troublesome for atomic absorption spectrometry (AAS), however, the techniques of standard additions or inter-element correction (IEC) method can effectively eliminated the interferences of Ni, As, Fe etc. with the Cd determination. By employing the multi-wavelengths and two correction point methods, the issues of background curve sloping shift and spectra overlap were successfully overcome. Besides, for the determinations of trace heavy metal elements, the relative standard deviation (RSD) was less than 3% and the detection limits were less than 1 microg x L(-10 (3sigma, n = 5) for samples, standard solutions, and standard additions, which proved that ICP-OES has a good precision and high reliability. This provided a reliable technique support for electronic and electrical (EE) industries to comply with RoHS directive.

Determination of Aluminium Content in Puffed Food by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), Microwave Digestion

Aluminium Determination in Foodstuffs by ICP-MS: Influence of Microwave Digestion Parameters on the Recovery

Determination of aluminium in puffed food by graphite furnace atomic absorption spectrometry

Simultaneous Determination of 20 Heavy Metals and Trace Elements in Sargassum Pallidum and Sargassum Fusiforme and Its Adulterants by Microwave Digestion-ICP-MS

The development and validation of a new method for the fast determination of Al, Ba, Ca, Cu, Fe, K, Mg, Mn, Na, Sr, and Zn in rice by inductively coupled plasma optical emission spectrometry

Development and Application of an ICP-AES Method for the Determination of Nutrient and Toxic Elements in Savory Snack Products after Autoclave Dissolution

Determination performance of ICP-MS heavy metals in food and feed test method through participation of proficiency testing programs

Determination of Metallic Element in Soybean Coat by Fermentation-Microwave Digestion-Microwave after Semi-Ashing Plasma Torch Atomic Emission Spectrometry

Ozone reaction induced multiple ionic species for internal-cross-checkable determination of aluminium by tandem quadrupole inductively coupled plasma mass spectrometry

Determination of Nutrient Elements in Health Care Medicine by MD-ICP-MS

Low gas flow inductively coupled plasma optical emission spectrometry for the analysis of food samples after microwave digestion

Determination of Acrylamide in Baked and Fried Foods by Liquid Chromatography-tandem Mass Spectrometry

Determination of Titanium in Foods by Microwave Digestion ICP-AES

A greener, rapid and accurate microwave-assisted hydrogen peroxide digestion method for ICP-OES determination of heavy metals in pet food samples

Determination of lead content in wheat powder by GFAAS with micro-wave digestion

[Determination of Heavy Metals for RoHS Compliance by ICP-OES Spectrometry Coupled with Microwave Extraction System].

Determination of 18 Inorganic Elements in Edible Wild Vegetables from Northeast China by Inductively Coupled Plasma Mass Spectrometry

Discussion of Method for Aluminum Content Determination in Pop Can

Determination of fourteen elements in iron oxide by microwave digestion inductively coupled plasma atomic emission spectrometry

Validation and Comparable Analysis of Aluminum in the Popular Chinese Fried Bread Youtiao by Wavelength Dispersive XRF.

Inductively Coupled Plasma Collision Cell Quadrupole Mass Spectrometric Determination of Extractible Arsenic, Cadmium, Chromium, Lead, Mercury, and Other Elements in Food Using Microwave-Assisted Digestion: Results from an FDA Interlaboratory Study