Abstract:OBJECTIVES:We intend to explore the polymerization shrinkage and mechanical-physical properties of the dental resin composite modified by polyurethane oligomer PU-MA and glass flakes fillers, and provide some experimental information for developing new dental materials. METHODS:Based on Bis-GMA/TEGDMA, the new dental resin composite was hand fabricated by combining PU-MA with different content (65 wt% ∼ 75 wt%) of glass flakes/Si-Al-borosilicate glass mixed fillers. The kinetics of polymerization shrinkage was investigated by using an experimental set-up based on laser triangulation. The mechanical-physical properties of specimens after 60 days water immersion and 5000 times thermo-cycles were measured by three-point bending test and micro vickers hardness tester. Data were submitted to one-way ANOVA/LSD-test (α = 0.05). Independent sample T test was used to analyze the data before and after aging. Two-way ANOVA was adopted to analyze the effect of composition and aging condition on the mechanical-physical properties (α = 0.05). RESULTS:PU-PG-75 % performs lower volume shrinkage (1.35%). As the increase of filler content, the water sorption and solubility increased and the depth of cure decreased significantly (P < 0.05). After aging, the flexural strength, elasticity modulus and vickers hardness of commercial products dropped obviously and PU-PG-75wt% was relatively stable. CONCLUSIONS:20 wt% PU-MA could decrease the volume shrinkage of dental resin composite effectively. 60 days water immersion and 5000 times thermal cycles simultaneously resulted in a significant reduction in the flexural properties for experimental materials. PU-PG-75 % may have the potential to be taken as a low shrinkage dental resin composite with good mechanical properties. CLINICAL SIGNIFICANCE:This new synthesized composite could perform low polymerization shrinkage and better mechanical resistance, which may provide a new idea for improving the lifespan of direct restoration.

Advancesin the effects of water sorption and solubility on property of composite resin as wellas the modified methods

Effect of polyhedral oligomeric silsesquioxane on water sorption and surface property of Bis-GMA/TEGDMa composites

The mechanism and influencing factors of denture base resins' sorption and solubility

Comparison of water absorption, solubility and monomer release of six kinds of light-curing composite resins

[The effect of denture base resins coated with antibacterial coating on water sorption, solubility and monomer elution].

Morphology and Properties of ACS/Ultrafine Sb_2O_3 Composites

INFLUENCE OF LONG-TERM WATER IMMERSION ON THE COEFFICIENT OF THERMAL EXPANSION OF COMPOSITE RESINS

Effect of compound coupling agent treatment on mechanical property and water absorption of hollow glass microspheres/epoxy composite

Synthesis and Properties of Bis-Gma-Based Composite Resin

Study on the Polymerization Shrinkage and Mechanical-Physical Properties of Dental Resin Composite Modified by Polyurethane Dimechacrylate and Glass Flake Fillers

Effect of water absorption on the mechanical properties of bamboo/glass-reinforced polybenzoxazine hybrid composite

Preparation of low shrinkage stress Bis-GMA free dental resin composites with a synthesized urethane dimethacrylate monomer.

Study Development of Dental Composite Monomers

Characterization of dental light-curing resin composites incorporating multiple modified low-shrink monomers

Investigation on the Effect of Fiber Wettability on Water Absorption Kinetics of Geopolymer Composites

Effects of washing agents on the mechanical and biocompatibility properties of water-washable 3D printing crown and bridge resin

Design of Resin Composites with Enhanced Physical–mechanical Properties

[A Study of Fluoride-Containing Composite Resins: Fluoride Release, Water Sorption and Dissolution].

Synthesis and Evaluation of Novel Dental Monomer with Branched Carboxyl Acid Group.

Synthesis, characterization and evaluation of a fluorinated resin monomer with low water sorption.

Semi-interpenetrating Interfacial Formation of Glass Fiber Reinforced Dental Resin Bio-Composites and Its Mechanical Properties