Abstract:To explore the modification mechanism of BS-12 (dodecyl dimethyl betaine) on different clay, this study chose bentonite and kaolin as the subjects. The modification mechanism was determined via the changes in the S-BC (sum of BS-12 and Ca2+/2 adsorbed on clay) curves. This mechanism was verified through the Vanselow ionic selectivity coefficients, adsorption isotherms and superficial characteristics such as TOC (total organic carbon) content, XRD (x ray diffraction) and SBET (specific surface area). Results indicated that: 1) Ion exchange and hydrophobic bonds coexisted in the process of bentonite and kaolin modification with BS-12, and the hydrophobic modification began to appear at BS-12 modification ratios of 40.09% and 29.11% CEC (cation exchange capacity) of bentonite and kaolin, respectively. After 85.30% and 78.44% CEC of bentonite and kaolin, respectively, hydrophobic modification was stronger than ion exchange and became the main modification mechanism. 1) LnK(v) [(the natural logarithm for K-v (Vanselow selectivity coefficients)] of two clays were all greater than 1, indicating that the adsorption preferences for BS-12 were greater than Ca2+, meanwhile the LnKv values increased significantly with the increase in BS-12 modification ratios. 3) Adsorption isotherms increased sharply before an inflection point occurred at the modification ratio of 60% (bentonite) and 40% (kaolin) CEC of clay, then the ascensional range decreased after this modification ratio. Lastly, both rapidly rose again after the modification ratio of 100% CEC of the two clays. 4) TOC content, door of two clays and S-BET of bentonite all showed no significant distinction between bentonite and 25%BS bentonite, S-BET had significant differences between kaolin and 15%BS kaolin. On the other hand, characteristics of 50% and 100%BS bentonite, 30% and 60%BS kaolin all significantly increased (for TOC and d(001)) or reduced (for S-BET) compare with that of 25%BS bentonite and 15%BS kaolin, respectively.

Surface characteristics and CrO2-4 adsorption of kaolin with different modification

Composite Modification Mechanism of Cationic Modifier to Amphoteric Modified Kaolin and Its Effects on Surface Characteristics

Surface characteristics and CrO 2-4 adsorption of kaolin with different modification

MODIFICATION MECHANISM OF AMPHOTERIC MODIFIER BS-12 ON TWO DIFFERENT CLAYS

Chromium (vi) Adsorption Characteristics of Bentonite under Different Modification Patterns

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Thermodynamics and Surface Characteristics of DTAB and BS-12 Co-Modified Bentonites

Comparison of Phenol Adsorption on Bentonite and Kaolinite Co-modified by BS-12 and Tween-80

Studies on Adsorption Characteristics of BS-12 on Kaolinite and Its Affecting Factors

Comparison and discussion on the adsorption capacity of several compounds with layered structure

CrO2-4 ADSORPTION CHARACTERISTICS OF LOU SOILS MODIFIED WITH ORGANIC SUBSTANCES

Studies on Cr(Ⅵ)and Cd2+adsorption Onto Bentonite Modified by a BS-12+DTAB Complex

Mechanism of CTMAB Modifying BS-12 Modified Bentonite

Phenol Adsorption Mechanism of Organically Modified Bentonite and Its Microstructural Changes

Research on performance of acid and alkali modified kaolins: II. Surface area and pore structure

Complex modification of amphoteric modified bentonite with Tween20 and its structure characteristics

Surface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites

Experimental and theoretical studies on the adsorption performance of lead by thermal pre-activation and phosphate modified kaolin sorbent

Study on Capture Performance on PbCl2 and CdCl2 Using Kaolin Modified by Sodium Ions

Chemically Modified Kaolinite Nanolayers for the Removal of Organic Pollutants

Effects of Cu(II) on the Adsorption Behaviors of Cr(III) and Cr(VI) Onto Kaolin