Effects of polyacrylamide application on rainfall runoff in composite slopes of loessial soil
L Wei,Li Shuqin,Lei Tingwu,Li Fahu
DOI: https://doi.org/10.3969/j.issn.1002-6819.2014.06.009
2014-01-01
Abstract:Soil and water loss from sloped lands in a loess plateau is the most serious region problem in China, and a composite slope is one of the main slope types in nature. Soil infiltration and runoff studies on composite slopes during rainfall processes and the effects of polyacrylamide (PAM) application rate on them were carried out by simulated rainfall experiments in the laboratory. The experimental treatments included two slope types (concave and convex slopes) with 12 combinations of slope gradients, and four PAM application rates of 0 (control), 0.5, 1.0, and 2.0 g/m2 (0, 5, 10, and 20 kg/ha). The concave slopes were composed of upslope gradients of 20 deg and 25 deg and down slope gradients of 5 deg, 10 deg, and 15 deg. The convex slopes were upslope gradients of 5 deg, 10 deg, and 15 deg and down slope gradients of 20 deg and 25 deg, respectively. The total number of experimental treatments was 48. Results indicated that PAM application significantly shortened the time of initial runoff initiation after an average rainfall by 63.7%-71.6%, as compared with the control treatment. After PAM application, the effects of slope type and the combination of different slope gradients on the time of initial runoff initiation were not obvious. Compared with the control treatment, the slope runoff pattern during the rainfall process was significantly changed after PAM application. Without PAM application, the runoff coefficient on concave slopes increased progressively with the rainfall process and then tended to be steady; the runoff coefficient on convex slopes was similar to that on concave slopes at the slope gradient of 5 deg, but it increased persistently with the rainfall process at the slope gradient greater than 10 deg. After PAM application, the runoff coefficient was generally steady during the majority period of the rainfall process, except for convex slopes when the upslope gradient was equal to or greater than 10 deg under a PAM application rate of 0.5 g/m2. Polyacrylamide application increased runoff coefficient as compared with control treatment. Runoff coefficient and total runoff volume increased with the increase of the PAM application rate. When PAM application rates were 0.5, 1.0, and 2.0 g/m2, total runoff volume increased by 55.7%, 100.2%, and 147.3%on concave slopes and 16.6%, 69.3%, and 108.9%on convex slopes, respectively. Under experimental conditions, total runoff volume on convex slopes was generally greater than that on concave slopes by 14.7%-31.8%. Polyacrylamide application at a rate greater than 0.5 g/m2 on loessial sloped land may increase runoff rate and total runoff volume significantly, which is favorable to rainfall runoff collection and its reutilization, but is disadvantageous to soil and water loss control. Therefore, a suitable PAM application rate should be determined comprehensively according to soil type, PAM property, and the PAM application purpose in practice.