Abstract:Ceramic membranes are applied to remove non-sugar impurities, including proteins, colloids and starch, from glucose–fructose syrup that is dissolved from raw sugar using acid. The performance of ceramic membranes with 0.05 μm pores in clarifying high-fructose syrup was investigated under various operating conditions. The flux decreased rapidly at the start of the experiment and then tended to stabilize at a temperature of 90 °C, a transmembrane pressure of 2.5 bar, and cross-flow velocity of 5 m/s under total reflux operation. Moreover, the steady-state flux was measured at 181.65 Lm−2 h−1, and the turbidity of glucose–fructose syrup was reduced from 92.15 NTU to 0.70 NTU. Although membrane fouling is inevitable, it can be effectively controlled by developing a practical approach to regenerating membranes. Mathematical model predictions, scanning electron microscopy, energy dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy revealed that foulants primarily responsible for fouling are composed of polysaccharides, proteins, sucrose, phenols, and some metal elements, such as calcium, aluminum, and potassium. Due to the removal of suspended colloidal solids, the membrane-filtered glucose–fructose syrup was decolorized using activated carbon; the filtration rate was effectively improved. A linear relationship between volume increase in syrup and time was observed. A decolorization rate of 90% can be obtained by adding 0.6 (w/w) % of activated carbon. The pretreatment of glucose–fructose syrup using a ceramic membrane coupled with activated carbon results in low turbidity and color value. This information is essential for advancing glucose–fructose syrup and crystalline fructose production technology.

Decolorization of Purified Syrup by Activated Carbon

A Study on the Decolorizing Condition of the Xylitol Fermenting Liquor

STUDY ON DECOLORIZATION CONDITIONS OF XYLITOL FERMENTATION BROTH

Adsorptive Behavior of Colored Impurities Generated in Aromatic Hydrocarbon Oxidation Process on Activated Carbons

Decolorization of corn syrup in a dynamic system by activated carbon bed: Microwave-assisted impregnation of H3PO4 over cherry and date stones for efficient purification

The Optimization of Activated Carbon Decolorization Process of Preserved Ginger Syrup-Juice by Response Surface Methodology

Pretreatment of Glucose–Fructose Syrup with Ceramic Membrane Ultrafiltration Coupled with Activated Carbon

Study on Electrolytic Decolourization of the Raw Sugar Syrup

Reducing Colour In White Sugar By Improved Syrup Flotation

Studies on Decolorizing of Xylo-oligosaccharides

Study on decoluring of xylo-oligosaccharides

Removal of Color Compounds from Sugarcane Juice by Modified Sugarcane Bagasse: Equilibrium and Kinetic Study

Comparison between several microporous absorbent resins in syrup decolorization

(3-Chloro-2-hydroxypropyl) trimethylammonium chloride and polyethyleneimine co-modified pomelo peel cellulose-derived aerogel for remelt syrup decolorization in sugar refining

Study on the decolorization of polysaccharides from Litchi fruit with active carbon

Effects of CO2 flow rate on morphology and adsorption capacity of CaCO3

Preparation of Powder Activated Carbon by Rice Husks and Application in Water Purification

Optimising decolourization and nitrogen component properties of corn protein hydrolysate: impact of activated carbon dosage and pH

Furfural Wastewater Decolorization with Activated Carbon Prepared by Furfural Residues

Decoloration of Raffinose Extract Solutions via Macroporous Resin Adsorption

Study on purification of sweet potato pectin