Abstract:Ensuring the stability of slopes is critical to the safe operation of geotechnical engineering. Evaluating slope stability to minimize geologic risks induced by destabilization is significant in reducing casualties and property damage. A conventional, single-coefficient strength reduction method is widely applied in slope stability analyses, but this method ignores the attenuation degree of different parameters in the slope destabilization. A new double-strength reduction method considering different contributions of the mechanics' parameters is proposed in this study for evaluating the stability of nonhomogeneous slope. First, the role of each mechanic's parameters in the slope destabilization was investigated theoretically and numerically using ABAQUS software 2022. The results indicate that the effect of elasticity (E), Poisson's ratio (v), and soil gravity (γ) on the evolution of factor of safety (FOS) are insignificant and can be neglected compared with cohesive force (c), and angle of internal friction (φ). Next, an improved method was constructed to correlate the FOS with cohesive force (c) and the angle of internal friction (φ). Then, a numerical method was constructed based on the computation of the mathematical–mechanical relationship between FOS and the mechanical parameters, and the stability of slope is estimation based on the Mohr–Coulomb yield criterion. Finally, the double-strength reduction coefficient method proposed in this study, the limit equilibrium method, and the traditional finite element strength reduction coefficient method were applied to nonhomogeneous slopes and slopes containing a soft underlying layer for comparison, and the difference between them was within the range of ±5%. The results indicate that both the limit equilibrium method and the traditional finite element strength reduction method tend to overestimate the FOS of intricate slopes compared with the evaluated method proposed in this study. This parallel comparison serves to validate the accuracy of the double-strength reduction method proposed in the present study. Further, based on the proposed method, the relationship between slope stability and slope displacement is established, which provides a theoretical basis for the safety assessment of slope engineering.

Study on the safety distance of strip footing on cohesive soil slope

Study on the Crack Mechanism and Back Analysis of Mechanics Parameters of the Soil Slope in the New Area of MaGang

Study on the undrained bearing capacity of strip footing on slope

A case study on soil slope landslide failure and parameter analysis of influencing factors for safety factor based on strength reduction method and orthogonal experimental design

Internal Force Calculation and Stability Analysis of the Slope Reinforced by Pre-Stressed Anchor Cables and Frame Beams

Solution and error evaluation for bearing capacity of rough strip footings

A Displacement-Based Method for Evaluating the Stability of a Pile-Stabilized Slope

Quantitative bearing capacity assessment of strip footings adjacent to two-layered slopes considering spatial soil variability

Analysis of Stability Against Upheaval for Foundation Pit with Anisotropic Soil Strength

Modeling Strip Footings on Slopes Using the Material Point Method

Stochastic Bearing Capacity and Failure Mechanism of Footings Placed Adjacent to Slopes considering the Anisotropic Spatial Variability of the Clay Undrained Strength

Stability evaluation of gentle slopes in spatially variable soils using discretized limit analysis method: a probabilistic study

Numerical analysis of pile reinforcement effect on cohesive and cohesionless soil slopes for assisting remote sensing

Numerical study on the factors influencing the stability of the unsaturated soil slopes under rainfall infiltration

Reliability analysis of slopes reinforced by frame-anchor structures under earthquake conditions

Slope Stability Analysis Considering Different Contributions of Shear Strength Parameters

Numerical Simulations of a Strip Footing on the Soil Slope with a Buried Pipe Using the Material Point Method

Study on dynamic safety distance of multi-storey buildings on the top of loess slope

A Novel Strength Reduction Method for a Slope Stability Assessment Based on a Finite Element Method

Method of Rigorous Characteristics for Seismic Bearing Capacity of Strip Footings Placed Adjacent to Homogeneous Soil Slopes

Seismic stability and failure mode of the slope containing a two-pile foundation