Abstract:The aim of the investigation was to optimize extrusion process parameters for processing commercial sinking fish feed with mixed plant protein sources in a pilot-scale twin-screw extruder equipped with a preconditioner. It has been found out that the bulk density of feed pellets increased with the moisture content in the range of 22-27% (wt), then decreased with the moisture content from 27 to 32%. Meanwhile, increasing moisture content (22-32%) resulted in a decrease of pellet hardness, water solubility, and specific mechanical energy (SME), and an increase of pellet hydration time. There was a significant decrease (p <.05) in SME, bulk density, and hydration time when the die temperature was increased from 90 to 140 degrees C. Increasing the screw speed (180-300 rpm) led to an increase in SME, water solubility index (WSI), and water solubility, but a decrease of water solubility index (WAI). The optimal process parameters for processing the sinking feed pellets were moisture content: 26.6%, screw speed: 180 rpm, and die temperature: 113 degrees C. These operation parameters provide a reference for the industrial production of fish feed with mixed plant protein sources. Practical applications In recent years, plant protein has been increasingly developed as an aquatic feed source, but this has resulted in quality fluctuations for fish feed pellets. Sinking pellets require sufficient gelatinization but should avoid floating due to excessive swelling. Thus, it is important to control the parameters of the extrusion process during sinking feed production. Contrary to conventional laboratory studies, this study used a pilot extrusion line (capacity: 70-150 kg/hr) equipped with a steam adding preconditioner and an automatic data acquisition system for parameter optimization. Moreover, we defined satisfactory products through the targeted evaluation of key indicators such as water solubility and hydration time. The results of this study provide a reference for the industrial production of sinking feed with mixed plant proteins.

Simulation of Running Stability in a Twin Screw Extruder for Wet Extrusion of Fish Protein

The effects of operating parameters on running stability of a twin screw extruder

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

Optimization of Process Variables in Thermoplastic Extrusion Texturization of Fish Protein

The Study of Numerical Simulation and Texture of Soybean Protein Based on High Moisture Extrusion with Different Screw Elements

Organizational Characteristics of the Combined Fish and Soybean Protein Extrusion

Optimization of the Process Parameters for Extruded Commercial Sinking Fish Feed with Mixed Plant Protein Sources

Computer Simulation of Extrusion Process of Intermeshing Co-Rotating Twin Screw Extruders

Optimization of Twin-screw Extrusion Process of Composite Grains-rice

Optimization of the Extruding Operating Parameters for Chicken Mixture with Twin-Screw Extruder

Optimization of composite extrusion process parameters of soybean protein and fish

Study on the Function of Conveying, Kneading Block and Reversing Elements on the Mixing Efficiency and Dispersion Effect Inside the Barrel of an Extruder with Numerical Simulation.

Integrated Numerical Simulation and Quality Attributes of Soybean Protein Isolate Extrusion under Different Screw Speeds and Combinations

Hydrodynamics and Mixing Performance in a Continuous Miniature Conical Counter-Rotating Twin-Screw Extruder

Optimization of Processing for Twin-screw Extrusion Texturization of Soybean Meal Using Response Surface Method

Optimization of Twin-Screw Extrusion Process to Produce Okara-Maize Snack Foods Using Response Surface Methodology

THE DEVELOPMENT OF SIMULATION OF RESIDENCE TIME DISTRIBUTION IN SCREW EXTRUDERS

Optimization of Twin-screw Extrusion Technology of Defatted Corn Gluten Meal by Response Surface-Methodology

Effects of Process Parameters on Fish Protein Texturization under High Moisture

Mechanical Model and Finite Element Analysis of Screw in Twin-Screw Extruder

Experimental and numerical characterization of screw elements used in twin-screw extrusion