Abstract:The present study presents an attempt to modify the surface properties of macroporous resins (MRs) in order to improve anthocyanin adsorption and desorption from Pyrus communis var Starkrimson fruit peel extract. A number of MRs were tested to optimise the ultrasonic-assisted adsorption (UAA) conditions; including ultrasonic power (100-400 W), resin-to-extract ratio (1-3 g/50 mL) and temperature (20-40 degrees C). Similarly, varying ultrasonic-assisted desorption (UAD) conditions were optimised; including ultrasonic power (200-600 W), resin-to-solvent ratio (1-4 g/50 mL), ethanol concentration (60-90% v/v) and temperature (20-40 degrees C). The Amberlyst 15 (H) cationic resin was found to be superior to the other tested resins. The maximum adsorption capacity (659 mu g/g) of cyanidin 3-galactoside (Cy 3-gal) was achieved under the optimised UAA conditions (400 W, 20 degrees C and 1 g/50 mL), while 616 mu g/g of Cy 3-gal was recovered under the optimised UAD conditions (582 W, 1 g/50 mL, 60% and 20 degrees C). Moreover, titratable-acid and total-sugar contents were found to be significantly lower under UAA than under conventional-assisted adsorption (CAA). ANOVA revealed that process factors had significant effects on the Cy 3-gal purification, as depicted by their linear, quadratic and interactive effects. While anthocyanin adsorption was found to be significantly improved at lower ultrasonic power, higher power promoted the desorption process. Adsorption under optimized UAA conditions followed pseudo second-order kinetics and multilayer adsorption (Freundlich isotherm) onto the Amberlyst 15 (H) resin surface was observed. The particle-size distribution curve and scanning electron microscopic images also revealed higher resin-surface roughness, peeling and the appearance of pores on the surface under ultrasonication. This is the first study to use ultrasonication to modify a cationic exchange resin for the improvement of Cy 3-gal purification from a fruit extract. This study can recommend the use of ultrasonication as a low-cost green technique that can improve macroporous resin characteristics for better purification of compounds from an extract

Study on Molecular Adsorption Process of Fruit Acid from Apple Juice

Technology for separation of fruit acid from apple juice using ion-exchange method

Ultrasonic-assisted Modifications of Macroporous Resin to Improve Anthocyanin Purification from a Pyrus Communis Var. Starkrimson Extract

A Comparative Study on the Adsorption of 8-Amino-1-naphthol-3,6-disulfonic Acid by a Macroporous Amination Resin

Study on Adsorption and Separation of Polyphenols and Pectin from Apple Pomace by Macroporous Resin Adsorbents

Study on Fruit Acid Separation and Utilization in Apple Juice

The Adsorption of Methamidophos, Patulin and Brown Substance in Apple Juice by Macroporous Adsorbent Resin

The Study on Extracting Pectin with D151H Cation Resin

Study on Removal of Acetic Acid by Ion Exchange

Static Adsorption Property of Dimethylamine on Ion Exchange Resin

Study on treatment of DMA containing wastewater with ion exchange resin

Aqueous Nitrate Removal by D417 Resin: Thermodynamic, Kinetic and Response Surface Methodology Studies

Study of the Adsorption of 6-Aminopenicillanic Acid on D301 and 330 Ion Exchange Resin

Kinetics and Equilibrium Adsorption Studies of Dimethylamine (DMA) Onto Ion-Exchange Resin

STUDY ON THERMODYNAMIC PROPERTIES FOR ADSORPTION OF o-PHTHALIC ACID FROM AQUEOUS SOLUTION BY MACRORETICULAR RESIN

Study on Adsorption Effect of Rebaudioside A and Stevioside Onto D392 Macroporous Resin

Synthesis, adsorption and molecular simulation study of methylamine-modified hyper-cross-linked resins for efficient removal of citric acid from aqueous solution

Simultaneous adsorption of acid and flavonoids from hawthorn juice onto resins

Extraction of Propionic Acid from Fermentation Broth by Ion-exchange Chromatography

Study on the Adsorption Capability of Macroreticular Resin for Patulin in Apple Juice

Study on Property and Mechanism of Adsorption of Chlorogenic Acids by Zinc-Containing D401 Macroporous Resin