Abstract:The quaternary amine (QA) functionalized adsorbent using water swing method has broad application prospects in capturing CO 2 in ambient air. However, poor kinetic performance and limited adsorbents remain a huge challenge. This work used D296 resin powder and polyethersulfone (PES) as the carrier to prepare a structurally controllable D296/PES membrane material. Quantitative studies were conducted on the effects of internal properties (Polyethylene glycol to polyethersulfone ratio, resin powder size) and external environmental conditions (humidity and temperature) on CO 2 adsorption performance of D296/PES membrane materials. The results showed that the porous resin had good kinetics, and the half adsorption time was 6 min, which was much lower than that of the gel resin about 2400 s. The smaller the resin particle size, the larger the specific surface area and pore size of the membrane material, and the larger the surface area of the resin exposed to CO 2 atmosphere. The increase in the contact area between the resin particles and CO 2 gas will promote CO 2 adsorption behavior. The higher the relative humidity, the slower the adsorption rate of the membrane material. Under the condition of high relative humidity of 42.3% and 62.5%, interface water can affect the internal structure of the adsorbent and hinder the diffusion of CO 2 . The increase in temperature has a promoting effect on the CO 2 adsorption process. Higher temperatures increase the diffusion rate of CO 2 and H 2 O, accelerating the adsorption reaction. The research results can provide basic data for the application of CO 2 capture in different situations. Graphical abstract Download : Download high-res image (66KB) Download : Download full-size image

Static Adsorption Property of Dimethylamine on Ion Exchange Resin

Kinetics and Equilibrium Adsorption Studies of Dimethylamine (DMA) Onto Ion-Exchange Resin

Study on treatment of DMA containing wastewater with ion exchange resin

Protein adsorption kinetics of mixed-mode adsorbent with benzylamine as functional ligand

Application of Heterogeneous Adsorbents in Removal of Dimethyl Phthalate: Equilibrium and Heat

Assessment on the removal of dimethyl phthalate from aqueous phase using a hydrophilic hyper-cross-linked polymer resin NDA-702.

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

A comparative study of the adsorption properties of 1-naphthylamine by XAD-4 and NDA-150 polymer resins

Adsorption Performance of 2-Amino-4-acetylaminoanisole onto Salicylaldehyde Grafted Merrifield Resin

Adsorption of 1,2,4-Acid by Weakly Basic Resin: Isotherms, Thermodynamics and Kinetics

Adsorption of Catechol from Aqueous Solution by Aminated Hypercrosslinked Polymers

Adsorption performance of silica supported polyamidoamine dendrimers for Cd(II) and Cu(II) in N,N-dimethylformamide

Adsorption of Phenol from Aqueous Solution by Aminated Hypercrosslinked Polymers

ADSORPTION ISOTHERM OF AMINOBENZOIC ACID ONTO DIFFERENT POLYMERIC ADSORBENTS

Adsorption of Amphoteric Aromatic Compounds by Hyper-Cross-linked Resins with Amino Groups and Sulfonic Groups

Adsorption of Salicylic Acid from Aqueous Solution by NDA-100 Macroreticular Resin

Adsorption of Reactive Dyes Onto Polymeric Adsorbents: Effect of Pore Structure and Surface Chemistry Group of Adsorbent on Adsorptive Properties

Facile Preparation, Characterization and CO2 Adsorption Performance of "Dry Amine" Adsorbents

A comparative study on the properties, mechanisms and process designs for the adsorption of non-ionic or anionic dyes onto cationic-polymer/bentonite

Study on the adsorption rate of anion exchange absorbents for capturing carbon dioxide in ambient air

Adsorption of 2,4-Dichlorobenzoxyacetic Acid Onto Hypercrosslinked Resin Modified by Phenolic Hydroxyl Group (Am-1)