Abstract:An effective way for improving the global load-carrying capacity of a steel arch with a welded hollow section is to increase the height of its webs. However, the high and thin web may buckle locally, which will affect the global load-carrying capacity and should be taken into account in predicting the global strength of the arch. This paper presents a numerical investigation for the in-plane strength and design for pin-ended circular steel arches with a welded hollow section, focusing on the effects of web local buckling by the large deformation inelastic analysis in association with a finite shell element model. The circular steel arches subjected to a radial load uniformly distributed along the arch length, a load uniformly distributed over the full span of the arch, or/and over the half span of the arch and their various combinations are considered in the investigation of their failure modes and strengths. The initial global and local geometric imperfections as well as residual stresses are included in the finite element model. It is found that web local buckling influences the global strength of the steel arches significantly and needs to be accounted in formulate their strength design formulas. The parameters related to the web local buckling and global buckling of the arch are thoroughly explored. It is found that the stability coefficients of arches under the nominal uniform axial compression are related to the equivalent normalized web height-to-thickness ratio of the cross-section and the normalized slenderness of the arch, and accordingly the design formula of the stability coefficients is proposed by including their effects. In addition, a design formula for predicting the strengths of the arches under a load uniformly distributed over the full span is developed by introducing a corrective coefficient into the stability coefficient, and it is found that the corrective coefficient is related to the arch rise-to-span ratio and slenderness of the arch. Furthermore, a general interaction design formula is developed for predicting in-plane strength of the arches under general in-plane loading such as a load uniformly distributed over the half span of the arch and various combinations of a full span uniform load and a half span uniform load. Comparisons with the finite element results demonstrate the proposed design formulas can provide good predictions and/or lower bound predictions for the strengths of the steel arches with a welded hollow section.

Calculation Method for Overall Stability of Solid-web Girder with Multiple Holes

Finite element analysis on shear capacity of the corrugated web H-shaped steel beam

An analytical method and its application for large-section PC box girder bridges

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs

Critical Load for Shear-Induced Lateral-Distortional Buckling in I-section Steel Beams Considering Flexural Stiffness Ratio

Elastic Buckling of Web Restrained by Flanges in I-section Members

TORSIONAL DEFORMATION CALCULATION OF LARGE SPAN THIN-WALLED STEEL BOX GIRDER WITH OPEN SECTION

Shear resistance of slender webs in I-girders

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Calculating Method and Experimental Research on Lateral Load Distribution of Transversely Strengthened Hollow Slab Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Flexural Decoupling Analysis Method of Composite Box Girder with Corrugated Steel Webs

Effect of variable-thickness webs on shear buckling performance of welded steel plate girders: Numerical analysis and proposed design rules

Numerical Investigation and Design Rules for Flexural Capacities of H-section High-Strength Steel Beams with and Without Web Openings

Elastic Bending Theory of Composite Bridge with Corrugated Steel Web Considering Shear Deformation

Experiments on H-shaped High-Strength Steel Beams with Perforated Web

Design Method for Bending Buckling of Web in Aluminum Beam

Strength Design of Pin-Ended Circular Steel Arches with Welded Hollow Section Accounting for Web Local Buckling