Abstract:Vibration behaviors of bogie hunting motion contain key information that dominates the dynamic performance of rail vehicles, in which the eigenvalue of each mode reflects the damping ratio and the natural frequency. This paper focuses on the root loci curves of bogie hunting motion, starting from a rigid bogie, then to a bogie with flexible primary suspension. With regard to the rigid bogie, analytical formulas for the eigenvalues, the critical speed as well as the corresponding hunting frequency are derived and verified. While for the flexible bogie, the root loci curves are calculated numerically. The study shows that both free rigid bogie and free wheelset are dynamically unstable at any speed. The critical speed increases with diminished wheel-rail conicity, track gauge, and wheelset and bogie inertia, and with increased wheelbase and wheel radius. The dominating factors such as the stiffness of the primary suspension and the wheel-rail conicity should be optimized for a practical design. The influences of the damping coefficients and the variations of creep coefficients are negligible. The motor suspension affects the root loci curves and the critical speed significantly. Both inappropriate motor suspension design and rigidly suspended motor reduce the critical speed. The increase of critical speed by a motor suspension can only be achieved when the lower natural frequency of the motorbogie frame-wheelsets system coincides with or is close to the hunting frequency. Special care should be taken for the design of motor suspension, the first is to avoid the decreased damping ratio in a certain speed range below the critical speed and the second is that the variations of parameters should not induce the rapid reduction of the critical speed. The main feature of the present study is that the root loci curves, which are derived as analytical formulas or calculated numerically, are used to study the vibrational behaviors of bogie hunting motion. Both the influencing laws of the dominating parameters and the principles regarding the motor suspension are significant for the stability design of modern railway vehicles which may use innovative structures/materials as well as modern control and monitoring technologies.

Study on Curving Negotiation Capability of the New Type Bogie with Independently Rotating Wheels in Rear Axle

Research on the Dynamics Performance of the Passenger Car with Controlled Radial Bogies in Negotiation of Curves

Analysis of primary suspension equivalent positioning stiffness of rotary arm type axle box bogie

Self-steering performance of a new bogie with four independently rotating wheels using caster angle

Study on Dynamic Response of Straddle-Type Monorail Vehicle with Single-Axle Bogie Under Curve Condition

Design and analysis of an active steering bogie for urban trains

A dynamic analysis scheme for the suspended monorail vehicle–curved bridge coupling system

Dynamic Modeling, Dynamic Characteristics, and Slight Self-Guidance Ability at High Speeds of Independently Rotating Wheelset for Railway Vehicles

Effect of Nonlinear Suspension on the Hunting Behavior of the Cooperrider Bogie

Analysis on Curve Negotiation Ability of the Rail Vehicle Based on SIMPACK

Study on dynamic performance of high-speed railway vehicle using roller rig and numerical simulation

Dynamic performance evaluation and optimization of steering rail vehicle based on sensitivity sequence

Research on the Dynamic Characteristic of the Bogie in Dynamic Track Stabilizer under the Excitation of the Track Irregularities

Elastokinematics and Compliance of a Rectilinear Rear Independent Suspension

Comparative Analysis on a Rectilinear Independent Suspension with Traditional Ones

Geometry optimization of a planar double wishbone suspension based on whole-range nonlinear dynamic model

Explicit solution to the nonlinear geometry of double wishbone suspension by decoupling steering and wheel jumping DOF

Vibration characteristics of bogie hunting motion based on root loci curves

Bifurcation and stability analysis of a high-speed rail vehicle with active yaw dampers

Simulation Of Low Speed Transition Curve Negotiation And Air Suspension Control To Prevent Wheel Load Reduction Of Railway Vehicle

Research on Handling Stability of Centre Axle Trailer Train Based on Direct Yaw Moment Control