Abstract:Waste resource utilization of petroleum coke is crucial for achieving global carbon emission reduction. Herein, a series of N-doped microporous carbons were fabricated from petroleum coke using a one-pot synthesis method. The as-prepared samples had a large specific surface area (up to 2512 m2/g), a moderate-high N content (up to 4.82 at.%), and high population (55%) of ultra-micropores (<0.7 nm). Regulating the N content and ultra-microporosity led to efficient CO2 adsorption and separation. At ambient pressure, the optimal N-doped petroleum coke-based microporous carbon exhibited the highest CO2 uptake of 4.25 mmol/g at 25°C and 6.57 mmol/g at 0°C. These values are comparable or even better than those of numerous previously reported adsorbents prepared by multistep synthesis, primarily due to the existence of ultra-micropores. The sample exhibited excellent CO2/N2 selectivity at 25°C owing to the abundant basic pyridinic and pyrrolic N species; and showed superior CO2 adsorption-desorption cycling performance, which was maintained at 97% after 10 cycles at 25°C. Moreover, petroleum coke-based microporous carbon, with a considerably high specific surface area and hierarchical pore structure, exhibited excellent electrochemical performance over the N-doped sample, maintaining a favorable specific capacitance of 233.25 F/g at 0.5 A/g in 6 mol/L KOH aqueous electrolyte. This study provides insight into the influence of N-doping on the porous properties of petroleum coke-based carbon. Furthermore, the as-prepared carbons were found to be promising adsorbents for CO2 adsorption, CO2/N2 separation and electrochemical application.

Peroxidation of petroleum coke and preparation of porous carbon

Preparation and methane adsorption performance of petroleum coke-based activated carbon

Effects of Chemical Modification of Petroleum Cokes on the Properties of the Resulting Activated Carbon

Facile Preparation of Oxygen-Rich Activated Carbon from Petroleum Coke for Enhancing Methylene Blue Adsorption

Study on the preparation of high value-added activated carbon from petroleum coke: Comparison between one- and two-step methods for carbonization and activation

Effect of Pre-Carbonization of Petroleum Cokes on Chemical Activation Process with KOH

EFFECT OF ACTIVATION PROCESS BY STEAM ON CAPACITY OF ACTIVATED CARBON FROM PETROLEUM COKE

Pretreatment of Petroleum Coke to Enhance the Reactivity of Catalytic Gasification in Fluidized Beds

Preparation of High Surface Area Activated Carbon from Petroleum Green Coke

COMPARISONS OF CHEMICAL PROPERTIES AND PORE STRUCTURE OF CARBONS ACTIVATED BY KOH AND NaOH

Study on Preparation of Compound Activated Carbon Adsorbent and Effect of Thiophene Adsorption

One-pot synthesis of N-doped petroleum coke-based microporous carbon for high-performance CO2 adsorption and supercapacitors

Preparation of Porous Carbons from Oil Residues

Insights into Properties of Activated Carbons Prepared from Different Raw Precursors by Pyrophosphoric Acid Activation

Influence Of Coal Preoxidation On The Porosity Of The Activated Carbons With Steam Activation

COMPARISONS OF PORE STRUCTURE AND ELECTROCHEMICAL PERFORMANCES OF CARBONS ACTIVATED BY KOH AND NaOH

NaOH Activation of Petroleum Coke: Effect of Hydroxide Content on Pore Structure and Electrochemical Performances

Activated coke preparation by physical activation of coal and biomass co-carbonized chars

Rapid, simple and sustainable preparation of N-rich activated carbons with high performance for gas adsorption, via microwave heating

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Petroleum coke based activated carbon prepared from chemical activation and chemical-physical activation