Abstract:The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multiple getting intersection and union to complete type synthesis. The number of redundant parallel mechanisms obtained by these two methods is limited. In this paper, based on Grassmann line geometry and Atlas method, a novel and effective method for type synthesis of redundant actuated parallel mechanisms (PMs) with closed-loop units is proposed. Firstly, the degree of freedom (DOF) and constraint line graph of the moving platform are determined successively, and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph, and a branch constraint allocation scheme is formulated based on the allocation criteria. Secondly, a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units. Finally, the branch chains that meet the requirements of branch chains configuration criteria and F&C (degree of freedom & constraint) line graph are assembled. In this paper, two types of 2 rotational and 1 translational (2R1T) redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational (2T1R) redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples, and 238, 92 and 15 new configurations were synthesized. All the mechanisms contain closed-loop units, and the mechanisms and the actuators both have good symmetry. Therefore, all the mechanisms have excellent comprehensive performance, in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled. The instantaneous analysis shows that all mechanisms are not instantaneous, which proves the feasibility and practicability of the method.

Type synthesis method of lower?mobility metamorphic parallel mechanism

Practical Structural Design Approach of Multiconfiguration Planar Single-Loop Metamorphic Mechanism with a Single Actuator

A novel reconfigurable parallel mechanism constructed with spatial metamorphic four-link mechanism

A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

Configuration Synthesis Method of Multi-Mode Parallel Mechanism Based on Variable Mobility Branch

Type synthesis of metamorphic mechanisms with scissor-like linkage based on different kinds of connecting pairs

Synthesis of Spatial Symmetrical 2-DOF Parallel Mechanism with Constraint Screw Theory

Type Synthesis of Parallel Mechanisms with Three Translational Degrees of Freedom

Type Synthesis of Metamorphic and Axisymmetric Parallel Mechanisms Using Singularity for Deployment and Latch

Type synthesis of parallel robot based on the kinematic element

Analysis and Type Synthesis of Parallel Mechanisms Without Parasitic Motion Based on Spatial Geometry

Type Synthesis of Three-DOF Translational Parallel Mechanisms

Multiple Bifurcated Reconfiguration of Double-Loop Metamorphic Mechanisms with Prismatic Joints

Type synthesis and three-dimension modeling of a new 3P-1R parallel platform mechanism

Topology Synthesis and Classification of Low-Mobility Parallel Mechanisms

Type synthesis of parallel mechanism with 3T/3R motion patterns

Actuation Spaces Synthesis of Lower-Mobility Parallel Mechanisms Based on Screw Theory

Type Synthesis of Parallel Mechanisms with the First Class GF Sets and Two-Dimensional Rotations

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

A Family of Folding Single-Loop Metamorphic Mechanisms for Aerospace Manipulators: Synthesis, Network, and Analysis

A unified approach to type synthesis of both rigid and flexure parallel mechanisms