Abstract:The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multiple getting intersection and union to complete type synthesis. The number of redundant parallel mechanisms obtained by these two methods is limited. In this paper, based on Grassmann line geometry and Atlas method, a novel and effective method for type synthesis of redundant actuated parallel mechanisms (PMs) with closed-loop units is proposed. Firstly, the degree of freedom (DOF) and constraint line graph of the moving platform are determined successively, and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph, and a branch constraint allocation scheme is formulated based on the allocation criteria. Secondly, a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units. Finally, the branch chains that meet the requirements of branch chains configuration criteria and F&C (degree of freedom & constraint) line graph are assembled. In this paper, two types of 2 rotational and 1 translational (2R1T) redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational (2T1R) redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples, and 238, 92 and 15 new configurations were synthesized. All the mechanisms contain closed-loop units, and the mechanisms and the actuators both have good symmetry. Therefore, all the mechanisms have excellent comprehensive performance, in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled. The instantaneous analysis shows that all mechanisms are not instantaneous, which proves the feasibility and practicability of the method.

Type synthesis and three-dimension modeling of a new 3P-1R parallel platform mechanism

Realization of 3D Modeling and Kinematics Simulation on a New 3P- 1R Parallel Mechanism

Modeling and Motion Simulation of New Type 3P-1R Parallel Mechanism Based on CAXA and ADAMS

Type synthesis of 5-DOF redundantly actuated parallel robots for super-large components with complicated surfaces.

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Type Synthesis of Three-DOF Translational Parallel Mechanisms

Structure synthesis of 3-DOF translational parallel mechanisms with configurable platform of translation

Type Synthesis of 2T1R Planar Parallel Mechanisms and Their Moduling Development Applications

New Method of Structural Synthesis Based on Screw Theory for 3-DOF Parallel Robot Mechanisms

A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

Type synthesis of single-loop 3T1R-parallel mechanisms with a multi-DOF drive system

Type Synthesis of Non-Overconstrained and Overconstrained Two Rotation and Three Translation (2R3T) Parallel Mechanisms with Three Branched Chains

Type synthesis of a family of novel parallel leg mechanisms driven by a 3-DOF drive system

Type Synthesis of Parallel Mechanisms with Three Translational Degrees of Freedom

Dynamic Modeling and Design of 3T-1R Parallel Robot

Solid Modeling for the 3T-1R Parallel Platform Mechanism

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

A new 3-DOF 2T1R parallel mechanism: Topology design and kinematics

Classification and type synthesis of 1-DOF remote center of motion mechanisms

Design of a novel 3-DoF parallel kinematic mechanism: type synthesis and kinematic optimization.

Synthesis of Spatial Symmetrical 2-DOF Parallel Mechanism with Constraint Screw Theory