Effect of influent ammonia concentration on biological nutrient removal in sequencing batch reactor with static/aerobic/anoxic regime
Dechao Xu,Hongbo Chen,Xiaoming Li,Qi Yang,Guan Luo,Bo Peng,Zhilong Wang,Jici Xie,Xiuqiong Wu
2013-01-01
Abstract:To investigate the effect of influent ammonia concentration on biological nutrient removal (BNR) performance of sequencing batch reactor (SBR) with static/aerobic/anoxic configuration, fours SBRs (R1, R2, R3 and R4) were operated with influent ammonia concentration of 20, 30, 40 and 50 mg/L respectively. The results demonstrated that 82.3%, 92.8%, 92.6% and 89.1% of phosphorus (P) removal efficiencies and 97.2%, 88.6%, 84.5% and 72.6% of total nitrogen (TN) elimination efficiencies were respectively obtained in R1, R2, R3 and R4 during the long-term operation. It could be concluded that static phase without stirring could function as anaerobic phase in this process, and thus enhanced the biological phosphorus removal. Simultaneous nitrification-denitrification (SND) was observed in the four systems and achieved respective 14.7%, 16.6%, 17.8% and 14.8% of TN elimination. Post-denitrification was driven by glycogen, achieving 0.57, 4.43, 6.61 and 13.70 mg/L of effluent TN in R1, R2, R3 and R4 respectively. The research indicated that different influent ammonia loadings had impacts on P release in static phase, aerobic P uptake and denitrifying P uptake in anoxic period; Post-anoxic denitrification process with anaerobic stage replaced with static phase displayed excellent BNR efficiencies, and could save cost and simplify procedure.