Abstract:Dynamics modeling plays an important role in the application of agricultural robots, which is the key to analyze the dynamic characteristics and achieve high-precision operation. This paper addressed the issue of deriving the dynamic formulation of a novel 3-DOF redundantly actuated parallel mechanism. The structure of the parallel mechanism is composed of a moving platform attached to a fixed platform through two identical PRRR kinematic chains and one PPRR chain. The parallel mechanism has two translational degrees and one rotational degree. Firstly, inverse kinematic solution of the parallel mechanism was studied by analyzing the structure property and the constraint equation; Secondly, according to the kinematics of the redundant mechanism and considering fully the impact of inertial force for each component, the inverse dynamic equation was formulated in the task space by using the Lagrangian formalism, and the driving force was optimized by utilizing the minimal 2-norm method. By investigating the contribution of each term in the dynamic model to the driving force, a simplified strategy of the dynamic model for real-time control application was proposed. Simulation and experimental results showed that the maximal value of the driving force for the parallel mechanism without actuation redundancy was 15N, but that of mechanism with actuation redundancy was 10N and the driving force peak was reduced by 33%. It is noted that the point β=57.6460° was the singularity which should be avoided in practical application. Additionally, the maximal tracking errors for the end-effector were 0.8mm, 0.6mm and 0.068° in Y, Z and β direction, respectively. Thus the parallel mechanism system based on the proposed dynamic model can achieve good tracking performance. This research provides technology reference for further study of high precision real-time control of parallel mechanism.

Analysis of Dynamic Modeling and Control of Parallel Mechanism

Kinematics and Dynamics Analysis of Overloaded Parallel Mechanism for Forward Feedback Control of Driving Force

On the Modeling and Composite Control of Flexible Parallel Mechanism

Dynamic Analysis of a Hybrid-driven 7-Bars Mechanism

Dynamic Modeling of Overconstrained Parallel Robot

Analysis And Control For A New Reconfigurable Parallel Mechanism

Analysis of rigid multibody dynamics for a novel 4-DOF parallel mechanism

Analysis and Application of a 2-DOF Planar Parallel Mechanism

Design and Control of Planar Parallel Mechanisms with High Speed and High Precision

Dynamic Modeling and Model-Based Control with Neural Network-Based Compensation of a Five Degrees-of-Freedom Parallel Mechanism

Dynamic Modeling and Design for the Parallel Mechanism of a Hybrid Type Parallel Kinematic Machine

Dynamic Formulation and Simplified Model of a Novel 3-DOF Parallel Mechanism with Actuation Redundancy

Dynamic Modeling and Design of 3T-1R Parallel Robot

Dynamics Behavior Analysis of Parallel Mechanism with Joint Clearance and Flexible Links

Kinematic Analysis and Application Research on A High-Speed Travelling Double Four-Rod Spatial Parallel Mechanism

Forward Dynamics Analysis of Spatial Parallel Mechanisms Based on the Newton-Euler Method with Generalized Coordinates

Dynamic Modeling of a Class of Parallel-Serial Mechanisms by the Principle of Virtual Work

Control Strategies Of Parallel Manipulator Systems

Synchronous Smooth Sliding Mode Control for Parallel Mechanism Based on Coupling Analysis

Coupling Mechanism Analysis and Dynamic Modeling for Lorentz Motor Motion Control

Dynamics modeling and experiments of 3-DOF parallel mechanism with actuation redundancy