Abstract:Continuous linear commands are widely executed in computer numerical control (CNC) machining. The tangential discontinuity at the junction of consecutive segments restricts the machining efficiency and deteriorates the surface quality. Corners of linear segments have been successfully blended by inserting parametric splines. There still exists challenges when the common methods are employed in the line-segment commands due to part of the following restrictions: (1) the stringent computation for iteratively calculating the arc-length; (2) the unwanted feedrate fluctuation; (3) the oversize contour deviation for separately completing curve fitting and velocity planning. A novel smoothing method based on a clothoid pair to synchronously accomplish planning of geometry blending and speed scheduling is proposed, the spline parameter of which is arc-length-parameterized. The arc-length, curvature extreme, and geometric shape of the transition curve are analytically expressed by the transition length. On these bases, the transition curve and the velocity profile are concurrently constructed based on the predefined approximation error, the reachable velocity, and normal kinematic constraints in the look-ahead stage. Then, a real-time interpolation scheduling is developed to overcome the crossing difficulties between the linear and parametric segments. Compared with existing methods, the proposed method can analytically calculate the length of transition curves for the arc-length-parameterized expression form. Furthermore, the feedrate fluctuation is eliminated in the fine interpolation. Moreover, the overlarge contour derivation produced by corner smoothing is significantly avoided. It is friendlier to the CNC system for the on-line executing smooth motion since more computing resources can be released to handle other tasks, smoother motion can be achieved and higher contour accuracy can be obtained. The experimental results also demonstrate its practicability and reliability.

B-spline Tool Offset of Free-Form Curve in Computer Numerical Control System

B-spline tool offset of a free-form curve in the shoe last high-speed machining CNC system

MOTION VELOCITY SMOOTH LINK IN HIGH SPEED MACHINING

B-spline Curve Fairing with Constraints

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Smooth contour-parallel tool path generation for high-speed machining through a dual offset procedure

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

An Improved Method of Tool Offsetting for Free Curve

Global toolpath smoothing for CNC machining based on B-spline approximation with tool tip position adjustment

A smooth tool path generation and real-time interpolation algorithm based on B-spline curves

A New Algorithm of Complex Curve Spline Interpolation

Offset algorithm for non-circular contour with point cloud data

A novel time-optimal linear toolpath smoothing method based on airthoid and circular splines for CNC machining

Enhancing Five-Axis CNC Toolpath Smoothing: Overlap Elimination with Asymmetrical B-splines

A Revised B Spline Interpolation Algorithm Of Cnc Machining

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

A Newly Developed Corner Smoothing Methodology Based on Clothoid Splines for High Speed Machine Tools

An error-bounded B-spline curve approximation scheme using dominant points for CNC interpolation of micro-line toolpath

A Real-Time Look-Ahead Interpolation Methodology with Curvature-Continuous B-Spline Transition Scheme for Cnc Machining of Short Line Segments

B-spline Based Corner Smoothing Method to Decrease the Maximum Curvature of the Transition Curve