Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Modeling and experiment of flexible manipulator actuated by shape memory alloy wire

Modeling and Motion Control of an Octopus-Like Flexible Manipulator Actuated by Shape Memory Alloy Wires

Flexible Robotic Spine Actuated by Shape Memory Alloy

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

Modeling and Simulation of SMA Wire Actuator

Dynamic characteristics of planar bending actuator embedded with shape memory alloy

Design and Research of SMA Spring Array Based Artificial Muscle

Design of a Flexible Bending Biomimetic Octopus Arm Unit with Embedded SMA Wires

Mechanical Properties of Shape Memory Alloys (SMA) Actuator of Bionic Flexible Dexterous Hand

Modeling The Mechanical Behavior Of An Sma Manipulator

A Lightweight Bending Actuator Based on Shape Memory Alloy and Application to Gripper

A Hybrid Dynamical Modeling Framework for Shape Memory Alloy Wire Actuated Structures

Design of the mechanism and parameters for novel shape memory alloy humanoid hand

Design and Experiment of a Hand Movement Device Driven by Shape Memory Alloy Wires

Modelling, Simulation and Experiments of Novel Planar Bending Embedded SMA Actuators

Research on a Compact and Flexible Actuator Consisting of SMA Springs

Dynamics Analysis of Flexible Manipulator Driven by SMA Spring

An Overview of Shape Memory Alloy-Coupled Actuators and Robots.

Modeling, optimization and application of novel planar bending ESMAAs

Research and application of novel planar bending embedded shape memory alloy actuator

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle