Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Research on a Compact and Flexible Actuator Consisting of SMA Springs

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

Flexible Robotic Spine Actuated by Shape Memory Alloy

Dynamic characteristics of planar bending actuator embedded with shape memory alloy

A Reconfigurable Soft Helical Actuator with Variable Stiffness Skeleton

Electroactive Bistable Actuators with Tunable Snap-through Performances and Adjustable Mechanical Bending Modes for Ultrafast Bioinspired Systems

Structure Design and Experiment Research of a Novel Actuator Based on SMA Wire

Dynamics Analysis of Flexible Manipulator Driven by SMA Spring

A Highly Integrated Shape Memory Alloy Actuator with Precision Real-time Self-sensing Control

Highly Dynamic Shape Memory Alloy Actuator for Fast Moving Soft Robots

Modeling and Position Control Simulation Research on Shape Memory Alloy Spring Actuator

Research on deformation of SMA spring actuators

A Novel Rotational Actuator With Variable Stiffness Using S-Shaped Springs

Modeling and Analysis of SMA Actuator Embedded in Stretchable Coolant Vascular Pursuing Artificial Muscles

Experiments and Modeling of Machined Spring Rotary Actuators with Shape Memory Alloys

Design and Property Analysis of a Hybrid Linear Actuator Based on Shape Memory Alloy

A helical actuator driven by biased SMA: design, model, and experiment

Experimental Study and Modeling of a Differential SMA Spring Actuator

A Novel Scaffold-Reinforced Actuator With Tunable Attitude Ability for Grasping

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle

A Gripper Actuated by a Pair of Differential SMA Springs