Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. This paper proposes a validated procedure that can be used for development stage of model-based controller for heavy-duty electromechanical disc brakes. Firstly, system dynamics model of a single piston electromechanical disc brake is constructed in Matlab/Simulink environment in consideration of nonlinear friction model. To ensure the accuracy of system dynamics model, open loop measurements (clamping force, motor angle and motor current) are conducted on a prototype of single piston electromechanical disc brake. Experimental data is used for the determination of system variables. The predicted outputs are verified by comparison of experimental measurement results. For the control purpose of electromechanical brake, a multi-stage closed loop architecture is introduced. To regulate clamping force, PID and sliding mode controllers are developed in Matlab/Simulink in consideration of braking performance requirements for heavy-duty vehicles. For management of running clearance between brake disc and pad, PID position controller is developed in simulation environment. Those controller parameters obtained in the simulation process are introduced to the control hardware. After that closed loop clamping force and position measurements are conducted. When the rise time values of both clamping force controllers are compared, it is seen that sliding mode controller can reach to the settling point faster than PID controller. As for the position controller, the rise time requirement has been achieved by the designed PID controller. The switching process of force and position controllers are implemented and functional closed loop measurements are conducted for different reference input signals. It is seen from the results that the rise time requirement for position controller has been achieved. The system response of clamping force parameter is considerably stable.

Control Strategy for Brake Clearance Adjustment of Electronic Mechanical Brake

Emergency Braking Control Strategy for High Speed Electric Drive Tracked Vehicle

A Novel Emergency Braking Control Strategy for Dual-Motor Electric Drive Tracked Vehicles Based on Regenerative Braking

Simulation and experimental research of a new automotive electromechanical brake system

Simulation and Experimental Study of a New Electromechanical Brake with Automatic Wear Adjustment Function

Wheel slip ratio control considering time delay characteristic for electro-mechanical braking system

Clamping force control based on dynamic model estimation for electromechanical brakes

Clamping force control of electro-mechanical brakes based on driver intentions

Electromechanical braking systems and control technology: A survey and practice

A Novel Bilevel Electromechanical Compound Braking Coordinated Control Strategy for Electric Vehicles

Slip ratio control based on adaptive fuzzy sliding mode for vehicle with an electromechanical brake system

Control Strategy of EBD Based on Wheel Acceleration and Slip Ratio

Braking performance oriented multi-objective optimal design of electro-mechanical brake parameters

Brake Pressure Control for Vehicle Driver Assistance System Base on Electronic Vacuum Booster

Modelling and control of electromechanical disc brake for heavy-duty vehicles

Modeling and Adaptive Control of the Electro-Hydraulic Braking System of Low-Floor Vehicle

A Multi-Source Braking Force Control Method for Electric Vehicles Considering Energy Economy

Working Mechanism of Brake Unit on Railway Vehicle and Its Mbd Simulation Experiment

Control Strategy of Dual-Winding Motor for Vehicle Electro-Hydraulic Braking Systems

Modeling and Clamping Force Tracking Control of an Integrated Electric Parking Brake System Using Sliding-Mode-Based Observer

A Modeling and Control Algorithm for a Commercial Vehicle Electronic Brake System Based on Vertical Load Estimation