Abstract:In order to get a deep understanding of biomass pyrolysis and gasification with particle size ranging from several millimeters to centimeters, detailed modeling of thermochemical conversion of thermally thick particles is required. In this paper, a new pyrolysis model for a large biomass particle is established, and the porous particle is modeled with two systems. In the continuous system, a uniform multiphase CFD algorithm is implemented to resolve both internal and external flow fields, and the solid temperature is solved by considering heat conduction, heat convection, and radiation. In the discrete system, the large particle is regarded as a porous media and discretized into a cluster of small virtual particles which are used to model the devolatilization and particle shrinkage. The evolutions of porosity and internal specific surface area during pyrolysis are also taken into account. The proposed model is first validated with the experiments in the literature, and good agreements have been obtained. Moreover, the temperature contour, gas species distribution, and streamlines both inside and outside the particle, which cannot be provided by the experiment, are also presented and analyzed. In addition, the effects of particle size, initial porosity, pore structure parameter, inflow velocity, tar generation, devolatilization heat, and particle shape on pyrolysis behavior are also explored. It is found that, increasing initial porosity, specific surface area, inflow velocity, particle length -to -width ratio, and decreasing particle diameter will reduce the intraparticle temperature gradient, which is also greatly influenced by the Stefan flow effect. Tar generation influences the thermophysical properties of the released gas and the interphase convective heat transfer. All the simulation results demonstrate that the current model is capable of capturing the detailed evolution of a large biomass particle during pyrolysis and providing deeper insight into the interaction between the particle and the surrounding gas.

Numerical Simulation of Pyrolysis of PMMA Involving Surface and In-Depth Absorption

A Numerical Study of Thermal Degradation of Polymers: Surface and In-Depth Absorption

Effects of Combined Surface and In-Depth Absorption on Ignition of PMMA.

Simulative Prediction of Ultrafine Particulate Matter Formation by Means of Different Pyrolysis Models

Mechanism of non-charring polymer thermal degradation involving two types of heat flux absorption modes

Experimental and Numerical Simulation Study of Typical Semi-Transparent Material Pyrolysis with In-Depth Radiation Based on Micro and Bench Scales

Pyrolysis and Piloted Ignition of Thermally Thick PMMA Exposed to Constant Thermal Radiation in Cross Forced Airflow

PMMA Pyrolysis Simulation -- from Micro- to Real-Scale

Ignition of Polymers under Exponential Heat Flux Considering Both Surface and In-Depth Absorptions

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Analytical Prediction of Pyrolysis and Ignition Time of Translucent Fuel Considering Both Time-Dependent Heat Flux and In-Depth Absorption

Experimental and numerical study of PMMA combustion in counterflow configuration

Experimental, analytical and numerical investigation on auto-ignition of thermally intermediate PMMA imposed to linear time-increasing heat flux

Auto-ignition of Thermally Thick PMMA Exposed to Linearly Decreasing Thermal Radiation

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Thermo-chemical ablation model of EPDM with porous structure characteristic

Modelling the Combustion of Thermally Thick Biomass Particles

Numerical Simulation of Coupled Pyrolysis and Combustion Reactions with Directly Measured Fire Properties

Numerical Model of the Pyrolysis of Combustible Materials with Volatile Residual Layer

CFD Modeling of the Effects of Particle Shrinkage and Intra-Particle Heat Conduction on Biomass Fast Pyrolysis

Improved Pyrolysis Model of Polymer Materials under Windy Conditions