Abstract:The present study investigated the influence of key design parameters on the seismic performance of prefabricated precast assembled piers' connection parts to better adapt to the industrialized construction of prefabricated precast assembled pier connected using grouting sleeves. Relying on a prefabricated assembled bridge in the actual project, the ABAQUS software was used to establish a refined solid finite element model of prefabricated assembled piers connected with grouting sleeves. Numerical simulation analysis was conducted for the piers with low circumferential reciprocating loading. The seismic performance of the prefabricated assembled piers was evaluated in terms of hysteresis characteristics, dissipation characteristics, and damage development. The effects of the length of the grouting sleeve and the diameter of the longitudinal reinforcement on the seismic performance were also investigated. The maximum error between the numerical simulation results and the test results was 5.7%, and the plastic region of the precast assembled pier obtained from the numerical simulation was consistent with the test results, indicating that the numerical simulation method is accurate and reliable. When the length of the grouting sleeve increased from 0.6 to 1.2 m, the yield load, peak load, and dissipation of energy of prefabricated assembled piers increased by 11.6%, 10.9%, and 11.4%, respectively; no significant change in residual displacement; ductility coefficient decreased by a small amount. When the longitudinal reinforcement diameter increased from 20 to 50 mm, prefabricated assembled piers yield load, peak load, and dissipation increased by 99.6%, 89.3%, and 218.9%, respectively, whereas the residual displacement increased by 137.3%, and the ductility coefficient decreased more. Increasing the length of the grouting sleeve or increasing the diameter of longitudinal reinforcement improved the stiffness of the piers, causing the piers to displace less and damage less under the same force, but the residual displacement would increase.

Analysis of Influence of Tie Beam on Seismic Performance of Double Leg Thin-walled High Piers

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Hysteretic Model for Steel Piers Considering the Local Buckling of Steel Plates

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

The Strong Column–weak Beam Design Philosophy in Reinforced Concrete Frame Structures: A Literature Review

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Aseismic control of a rigid frame bridge with double-limb high piers based on energy dissipation tie-beams

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Seismic Performance and Damage Mechanism of RC Double-Column Pier Structure with Triple Coupling Beams

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Mechanical Behavior of a Double-Column Self-Centering Pier Fused with Shear Links

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Study on the pier bottom self-centering seismic isolation structure of the high-pier continuous rigid frame bridges

Analysis of Wind-resistant and P-Δ Behavior of Continuous Rigid Frame Bridge with High-pier under Construction

Effective length coefficient of pier of multi-span continuous rigid-frame bridge based on transfer matrix method with branch

Study on Seismic Performance Optimization of Assembly Concrete-Filled Steel Tubular (CFST)-Laced Piers

Research on the Factors Influencing the Seismic Performance of Grouting Sleeve Assembled Double-Column Piers