Abstract:Topology optimization as a computational approach is used to find an optimal structure with specific objectives such as an ultimately lightweight design. The optimization is normally performed under a series of constraint functions to ensure expected structural performance for safety and resilience. To promote the use of topology optimization in structural engineering, it is crucially important to identify and apply suitable constraints for realistic construction. In this paper, a conceptual attempt aiming for a construction-oriented topology optimization framework is presented. An isogeometric analysis module using NURBS curves for geometric description and discretization is employed in stress analyses, which incorporates the density-based SIMP optimization approach to generate the optimized topology. A Drucker–Prager criterion is adopted to constrain the stresses within the unequal limits of tension and compression for the use of concrete type material. To prevent slim components of potentially high complexity in construction, a minimum-width control is applied as an additional geometric control. In this paper, the conceptual framework is demonstrated using a prestressed concrete beam, while the optimization is performed to find suitable density distribution of concrete and a NURBS-described tendon profile after imposing the mapped prestressed action. The iterative optimization processes are presented and demonstrated to investigate the effect of tensile-compressive strength ratio and the minimum width, which reflects the construction-oriented vision pursuing a more regularized topology after applying the constraints in optimization.

Topology Optimization and Strength Analysis of Mount Bracket for Powertrain

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Lightweight design of aircraft truss based on topology and size optimization

Isogeometric Analysis-Based Design of Post-Tensioned Concrete Beam Towards Construction-Oriented Topology Optimization

Lifting-bracket Improvement Design Based on Topology Optimization

Topology Optimization of the Bracket Structure in the Acquisition, Pointing, and Tracking System Considering Displacement and Key Point Stress Constraints

Topological Design of a Hinger Bracket Based on Additive Manufacturing

Optimization and Robustness Analysis of Powertrain Mounting System

The Path-Engulfment Method for Topology Optimization of Structures

Structural Topology Optimization for Street Lamp Bracket

Topology Optimization of Mini-truck Frame

A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation

Topology optimization of engine bracket arm using BESO

Research on mechanical structure optimization based on topology theory

Topology Optimization of Compliant Mechanisms Considering Manufacturing Uncertainty, Fatigue, and Static Failure Constraints

Optimized Design of Canister Bracket

Topology optimization-based lightweight design of a certain tubular beam subframe

Topology optimization design of integral bus chassis

Optimizing Research on the Strengthen Bracket of Hull Lifting Lug