Abstract:Multi-wavelength temperature measurement technology is an advanced radiation temperature measurement technology, which assumes a functional relationship between emissivity and spectrum. The measured multi-wavelength radiation signals and the function relationship between emissivity and spectral is used to obtain the true temperature and emissivity of the target. Multi-wavelength imaging temperature measurement technology detects the multi-wavelength radiation image information of the target and inversely calculates the temperature field distribution of the target. Aiming at the inadequacy of color CCD-based multi-wavelength imaging temperature measurement, such as adaptability of the nonlinear spectral emissivity model, and the narrow dynamic range of temperature measurement, and so on, a four-wavelength non-scanning imaging temperature measurement method based on non-equal ratio filter color splitting at the diaphragm was proposed. This method could effectively compress the band imaging bandwidth to form four narrow band imaging detections, and was suitable for wide dynamic range temperature field measurement of nonlinear spectral emissivity model targets. A four-wavelength imaging thermometer was developed according to the proposed temperature measurement method. The thermometer was mainly composed of a window, a neutral optical attenuator, a four-color filter, an optical objective lens, a visible/near infrared integrated sensor, a measurement control unit, and software. The real temperature distribution of the target was obtained according to the multi-wavelength warming algorithm by the thermometer software. The target high-temperature field (800-2500 ℃) was tested under laser heating conditions. The comparison between the measurement result and the thermocouple data shows that the error is less than 1%, and the method has higher accuracy and better dynamic range adaptability.

A temperature measuring method with a dual optical paths structure based on CCD cameras

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Double-CCD temperature field measuring apparatus and method

Data Processing Method of Time-of-flight 3D Imaging Camera

Improvements to the Three-Color Optical CCD-based Pyrometer System

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Non-scanning Wide Range Multi-Wavelength Imaging Temperature Measurement Technology

Removal of Optical Crosstalk Caused by Light Source for Synchronous Measurement of Temperature and Deformation

Temperature-Automated Calibration Methods for a Large-Area Blackbody Radiation Source

Measurement Performance of an Optical CCD-based Pyrometer System

Two-color optical charge-coupled-device-based pyrometer using a two-peak filter.

Research on the Temperature Compensation of Optical Fiber Displacement Sensor Based on Multisensor Data Fusion.

Color crosstalk correction for synchronous measurement of full-field temperature and deformation

Design of Spectrophotometer for Measuring Polarized Transmittance and Reflectance at Different Temperature

RESEARCH ON TEMPERATURE FIELD MEASURING FOR COMBUSTION FLANCE BASED ON PLANE SURFACE ARRAY CCD

A New Method Of Two-Color Calibration And One-Color Measurement For Real-Time Inspection Of Temperature Field

STUDY ON REAL-TIME MEASUREMENT FOR TEMPERATURE FIELD BY IMAGES COLORIMETRIC METHOD

Research on numerical calculation of colorimetric temperature measuring method for high temperature flame image processing

Improved Monochromatic Pyrometry for Synchronous Measurement of Full-Field Temperature and Deformation

Method for implementing thermodynamic temperature measurement based on color temperature meter