Abstract:This article presents a numerical analysis and experimental study on condensation heat transfer and fluid flow for filmwise condensation on trapezoid grooved surfaces. First, a physical model was properly simplified based on some reasonable assumptions. Then, the coupled non-linear governing equations for the mass transfer, fluid flow, and two-dimensional thermal conduction were developed. The relationship between z -coordinate and heat transfer was obtained by solving the equations numerically. The influences of groove length and basic angle were discussed. The calculation results showed that the heat flux decreased with increase in groove length, and the decline range also decreased gradually. The calculation results also suggested that the heat flux through groove with α = 60° was lower than the groove with α = 75° at the top of the groove, while the opposite conclusion was obtained at the low parts. The distributions of wall temperature and heat flux on trapezoid groove were also studied systematically. The distribution of surface temperature and heat flux presents obvious lateral inhomogeneity, and the maximum wall temperature and heat flux were both obtained in region II. The thermal resistance of groove with α = 60° was lower but the liquid-discharged ability was better than that of groove with α = 75°. In order to validate the feasibility and reliability of the present analyses and to further investigate the heat transfer performance of trapezoid grooved surfaces, experiments were carried out with three condensing plates including two trapezoid grooved surfaces in different physical dimensions and one smooth surface. The experimental data obtained under various schooling were compared with the calculations, and the experimental results for different condensing plates are all in good agreement with the numerical model, with a maximum deviation less than 15%. Moreover, the trapezoid grooves can enhance the condensation heat transfer by 1.5–2.5 times higher than the smooth surface. The present analyses are feasible and can be used in the parameter design and heat transfer calculation of trapezoid grooved surfaces.

Characteristics of a Micro Flat Heat Pipe with Trapezoidal Grooves

Thermal Analysis and Maximum Heat Transport of a Micro Flat Heat Pipe with Axial Triangle Grooves

Design, Simulation and Fabrication of A Silicon Micro Flat Heat Pipe with Axial Triangle Grooves

Theoretical Analysis and Experimental Investigation on Designing Method of Micro-Groove Heat Pipe

Numerical Simulation of Silicon Micro Flat Heat Pipes with Axial Triangle Grooves

Theoretical Analysis of Flat Heat Pipe with Graded-Porosity Wick Design

Design and Experimental Analysis of Grooved Flat Aluminum Heat Pipe

Thermal Performance Analysis of Flat Heat Pipe with Graded Mini-Grooves Wick

Heat Transfer Capacity Optimization Design of Microgroove and Microcolumn in an Ultra-Thin Flat Heat Pipe

Impact of Microgroove Shape on Flat Miniature Heat Pipe Efficiency

Ploughing-Pulling Forming for Wicking Structure of Flat Micro-Groove Heat Pipe and Machine Tool Optimization

Investigation of Thermal Characteristics and Two-Phase Flows of a Star-Shape Thin Heat Pipe

Numerical Simulations of the Liquid-Vapor Phase Change Dynamic Processes in a Flat Micro Heat Pipe

Numerical Study on Condensation Heat Transfer of Trapezoid Grooved Surfaces

Corner Flow Characteristics in a Silicon-Based Ultra-Thin Flat-Grooved Heat Pipe with Double-End Cooling

Assessment of Vapor Formation Rate and Phase Shift between Pressure Gradient and Liquid Velocity in Flat Mini Heat Pipes as a Function of Internal Structure

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Visualization Study on the Enhancement of Heat Transfer for the Groove Flat-Plate Heat Pipe with Nanoflower Coated CuO Layer

Design and Research of Flat Micro Heat Pipe with Glass Fiber Wick

Thermal Performance of a Micro Heat Pipe Based on Functional Surface

A Mathematical Model for Optimizing the Structure of A Flat Micro Heat Pipe with Fiber Wick