Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

The Design and Analysis of Underwater Transducer based on the Finite Element Method

The Design And Finite Element Analyses Of The Super-Long Ultrasonic Amplitude Transformer

[ATTEMPTED EVALUATION OF ELECTROSURGICAL THERAPY OF MALIGNANT TUMORS OF THE MAXILLA].

Research on Air Pressure Compensation System for Transducer Underwater

Design simulation and analysis of deep-sea transducer

Design Considerations for a Position-Adaptive Contactless Underwater Power Deliver System

Simulation and Optimization of Wedge-Shaped Ultrasonic Transducers Using Finite Element Method (Fem)

A Finite Element Method for Dielectric Elastomer Transducers

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Structural design of an acoustic planar array transducer by using the equivalent circuit method

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

Spatial Analysis Of The Submerged Floating Tunnel In The Jintang Strait

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Terfenol-D giant magnetostrictive transducer simulation byfinite element method

Structural Design and Optimization of Low-Frequency High-Power Electromagnetic Transducer

Numerical simulation of acoustic waves propagation by finite element method based on optimized matrices

Design and Simulation of Flexible Underwater Acoustic Sensor Based on 3D Buckling Structure

Finite-element analysis for shallow water flows and high-resolution ratio FEM scheme

The optimization design of the deep-sea hydrothermal sampler with high fidelity by FEA

Structural Optimization and Performance of a Low-Frequency Double-Shell Type-IV Flexural Hydroacoustic Transducer