Abstract:Most of the published works related to noise generation in high-lift devices only consider clean idealized geometries, whereas real aircraft wings contain important parts called the slat tracks that connect the slat and the main wing. To investigate the effects of slat tracks on the ambient flow and noise, simulations are performed for wings based on the 30P30N airfoil. Two configurations are considered, i.e., the 30P30N wing with and without a slat track. Improved detached-eddy simulation is carried out to compute the unsteady near-field flow. The far-field noise propagation is calculated using the Ffowcs Williams-Hawkings equation. The results show that the installation of the slat track has observable effects on the aerodynamic and aeroacoustic performances of the high-lift devices. The maximum lift coefficient of the high-lift device and the stall angle of attack is reduced. Low-frequency broadband noise radiated from the main wing is significantly increased and the directivity of the overall sound pressure level is changed due to the slat track. The far-field noise from the configuration with the slat track displays noticeable sensitivity to the angle of attack. The slat track has an amplification effect on the high-pressure fluctuation on the main wing, especially at a small angle of attack. This leads to nearly 10 dB in the far-field noise based on the discussed wing section. To reveal the relative noise mechanism, vortical structures near the slat track, large-scale spanwise flows above the main wing, and the vortex dynamics are investigated. A spiral vortex pair is captured as the most important flow structure. It is generated in the spanwise direction by the interaction of slat wakes with the boundary layer on the upper surface of the main wing. The pressure fluctuations on the main wing are highly correlated with this flow structure, which cannot be ignored for the study of noise in a real aircraft. (C) 2022 Elsevier Masson SAS. All rights reserved.

Aerodynamic noise suppression of slats by using a SNGR method

Slat Noise Suppression Using Upstream Mass Injection

Slat Noise Suppression with Mass Injection

Numerical Simulation of on Two-Dimensional High Lift Device Noise by SNGR Method

Slat noise suppression based on upstream parallel mass injection

Comprehensive Study on the Slat Noise of 30P30N High-Lift Airfoil Basd on High-Order Wall-Resolved Large-Eddy Simulation

Effects of slat track on the flow and acoustic field of high-lift devices

An Artificial Neural Network Approach for Aerodynamic Performance Retention in Airframe Noise Reduction Design of a 3D Swept Wing Model

Noise Control for High-Lift Devices by Slat Wall Treatment

Noise Reduction for High-Lift Devices on a Swept Wing Model by Droop Nose

The Control of Aerodynamic Sound Due to Boundary Layer Pressure Gust Scattering by Trailing Edge Serrations

Zpnal LES/DES methpd and its applicatipn in slat flpw field simulatipn

Slat cove filler design for noise reduction based on artificial neural network

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

Slat noise in high-lift systems

Far-field Aeroacoustic Analysis for Slat of a Two-Dimensional High-Lift Configuration

A Numerical Study on the Flap Side-Edge Noise Reduction Using Passive Blowing Air Concept

Flow Separation Control and Aeroacoustic Effects of a Leading-Edge Slat over a Wind Turbine Blade

An Analytical Correction to Amiet’s Solution of Airfoil Leading-Edge Noise in Non-Uniform Mean Flows

Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number

Numerical Analysis of Broadband Noise Generated by an Airfoil with Spanwise-Varying Leading Edges