Abstract:<p>The conventional optimal calibration of a TLCD for suppressing structural vibration is based on the classic 2-degrees-of-freedom (2-DOF) model in terms of one specific structural mode (usually the resonant mode). For flexible multi-degrees-of-freedom (MDOF) structures, this implies that background flexibility contribution from other non-resonant modes is omitted, resulting in an unbalance in the frequency response of the flexible structure-TLCD coupled system. Furthermore, numerical search techniques are usually used for optimizing TLCDs, and extensive computational efforts are required. Therefore, in this paper a novel closed-form optimal calibration procedure accounting for the background flexibility contribution from the flexible structure is developed based on the pole-placement method. The background flexibility is represented by an equivalent stiffness that is derived from modal analysis. An analogue 2-DOF model accounting for background flexibility is developed, which turns out to be a generalization of the classic 2-DOF model. The root locus analysis is performed to derive the optimal frequency ratio of the TLCD by the equal modal damping ratio criterion. A straightforward approach for determining the optimal head loss coefficient is proposed based on the bifurcation point present in the root locus. It is seen from the closed-form formulas that the optimal parameters of the TLCD depend not only on the constructive parameters (such as the mass ratio and horizontal length ratio of a TLCD) but also on the structural inherent characteristics. Application to MDOF flexible structures are illustrated by a 10-story shear frame. Results demonstrates that the proposed calibration procedure leads to a balanced frequency response curve and thus improves the performance of the TLCD comparing with the calibration procedure ignoring background flexibility.</p>

Vibration control experiments on self-standing steel-tube structures installed with ring shape TLCD

DYNAMIC CONTROL OF TENSION STRUCTURES

A semi-active toroidal TLCD for multidirectional vibration reduction of structures

Development and validation of a nonlinear dynamic model for tuned liquid multiple columns dampers

Event-triggered Semi-Active TLCD for Ground Motion-Induced Vibration Control

A Toroidal Tuned Liquid Column Damper for Multidirectional Ground Motion‐induced Vibration Control

Semi-Active Control of Randomly Wind-Excited Tall Building Structures Using Mr-Tlcds

Multilayer Toroidal Tuned Liquid Column Dampers for Seismic Vibration Control of Structures

Optimal Performance of the TLCD in Structural Pitching Vibration Control

Closed-form optimal calibration of a tuned liquid column damper (TLCD) for flexible structures

진동대를 이용한 TLCD의 진동성능실험

Vibration reduction of high-rise buildings with converted TLCD acted by wind load

Optimal design of short-period structures equipped with sliding tuned liquid column damper and numerical and experimental control performance evaluation

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Comparison of Performance of Different Tuned Liquid Column Dampers (TLCDs)

Application of tuned liquid column ball damper (TLCBD) for improved vibration control performance of multi-storey structure

A Novel Single Tube Semi-Active Tuned Liquid Gas Damper for Suppressing Horizontal Vibrations of Tower-like Structures

Design and Performance Evaluation of Toroidal TLCDs in Bidirectional Seismic Control of Structures Using a Modified Dynamic Model

Parameter Optimization of Toroidal Tuned Liquid Column Dampers for Suppressing Multi-Directional Harmonic Vibration of Structures

Control Performance Comparison Between Tuned Liquid Damper and Tuned Liquid Column Damper Using Real-Time Hybrid Simulation