Abstract:Substructure method has been widely applied in dynamic analysis of complex structures due to high computational efficiency. On the basis of Residual flexibility mixed-boundary (RFMB) substructure method, a model updating approach is proposed in this paper. Four major steps of the RFMB model updating method are summarized as: 1) Substructuring: Dividing the whole structure into residual part and reduced part according to the junction surface; 2) reduction: Using the RFMB component mode synthesis approach to reduce the order of each substructures; 3) assembly: Residual structure analysis by using the reduced assemble matrix; 4) updating: Model updating by solving the optimization problem. Numerical simulation is conducted to verify the effectiveness by adopting a cantilever plate in case I. In case II, the proposed method is applied to identify the elastic parameter of interface of a bolted joint structure using experimental data. After parameter identification, the maximum error between numerical results and the experimental data decreases to 2.44 %. And three component mode synthesis model updating methods: Craig-Bampton (CB), Mixed-boundary (MB) without considering residual flexibility and RFMB model updating approach, are applied to update the same bolted joint structure for comparing the accuracy. For comparing the computational efficiency, the RFMB model updating approach is applied to the complicated aero-engine casing structure. In case III, the average time-consuming of the Whole finite element model (WFEM) is 5.15 times to the Residual finite element model (RFEM) in the single updating iteration. Results show that the proposed approach has better performance in the finite element model updating.

Frequency response function based sub-structuring synthesis method with flexible equivalence of interface's DOFs

Substructure Synthesis Method Considering Dynamic Behavior of Joints

Exact Synthesis of Structural Random Responses Using Substructure Modes

An Accurate Substructural Synthesis Approach to Random Responses

EXACT MODAL SYNTHESIS METHOD USING MID/HIGH-ORDER SUBSTRUCTURE MODES

A New FDTD Subdomains-Synthesized Method for the Efficiency Promoting of Simulation

Another explicit forms of dynamic substructuring approaches using dynamic constraints at joint nodes

Collaborative Optimization of Discrete Structures Based on a Substructuring Method

EXACT MODAL SYNTHESIS TECHNIQUES USING RESIDUAL CONSTRAINT MODES

Fixed-interface Component Mode Synthesis Using Proper Orthogonal Decomposition

Substructure sensitivity synthesis with fixed Ritz basis

Simulation of Large-Scale Numerical Substructure in Real-Time Dynamic Hybrid Testing

A method for substructure decoupling of mechanical systems by using frequency response functions

Real-time Hybrid Simulation Based on Vector Form Intrinsic Finite Element and Field Programmable Gate Array

Structured controller synthesis with restricted frequency domain specifications

Substructure-based model updating using residual flexibility mixed-boundary method

A modal synthesis method based upon dynamic stiffness on interface

Flexible Multibody System Linear Modeling for Control Using Component Modes Synthesis and Double-Port Approach

Sub-Structuring Modeling of Large Space Truss Structures for Structure/Control Optimization in Presence of Parametric Uncertainties

Coupling dynamic stiffness identification of mechanical assembly with linear and planar connection by the indirect scheme of inverse substructuring analysis

A general fidelity transformation framework for reliability-based design optimization with arbitrary precision