Abstract:Many metal materials possess the transition from strain localization to fracture, the so-called post-necking behavior, during large deformation under tensile load. It is crucial to understand and characterize the transition for the application of these materials. In this paper, the stress state dependence of the transition from strain localization to fracture of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy is characterized and analyzed by carrying out experiments and phase-field modeling. Firstly, tensile tests for smooth and notched round bars were conducted, in which the notched specimens have different notch radius. It was observed in the tests that the sharper the notch, the shorter the transition process, which can be explained as that high stress triaxiality would shorten the transition process. To further quantify the effects of stress triaxiality in the transition process, the phase-field fracture model involving the nucleation, growth and coalescence of micro-voids is developed to simulate and characterize the damage evolution observed in experiments. The simulations show that as the stress triaxiality increases, the material undergoes less plastic deformation, whether in the initiation of strain localization or the transition process. More interestingly, it is found that there exists a critical value of stress triaxiality, which can be considered the characteristic point of brittle-ductile transition. Above this point, the material has almost no plastic deformation before localization, and brittle fracture occurs directly. This work is meaningful for evaluating the safety of metal structures under complex loads.

An experimental study on the stress waves with phase transition under combined tension-torsion loading

Study on the Propagation of Coupling Shock Waves with Phase Transition under Combined Tension-Torsion Impact Loading

Combined Stress Waves with Phase Transition in Thin-Walled Tubes

The propagation of coupling plastic waves in a rate-sensitive material under compression and torsion

Experimental study on centrifuge concrete filled thin-walled steel tubular components under the action of torsion

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

Propagation of Phase Transformation Fronts in Pseudoelastic NiTi Tubes under Uniaxial Tension

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

3D Modeling for Dynamic Response of Mixed Phase During Phase Transition

Study of the Transition from Strain Localization to Fracture of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si Alloy by Experiments and Phase-Field Modeling

Effect of Stress Ratio on the Transition Point of Fatigue Crack Growth Curve in the Near-threshold Regime of a 25cr2ni2mov Steel Welded Joint

Thermomechanical coupling in cyclic phase transition of shape memory material under periodic stressing—experiment and modeling

Investigation Of Stress-Strain Behavior Of A Component Under Variable Frequency Non-Proportional Loading

Dynamic Responses of Tini Phase Transformation Cylindrical Shell under Radial Impact Load

Experimental Study of the Dynamic Behavior of TiNi Cantilever Beams with Phase Transformation Subjected to Transversal Impact

Insitu Neutron Diffraction Study of Micromechanical Interaction and Phase Transformation in Dual Phase Niti Alloy During Tensile Loading

Study on Stress-Strain Response of Multi-Phase TRIP Steel under Cyclic Loading

Numerical simulation on response of TiNi clipped-beam under large mass low-speed impact loading

Study on the mixture strain hardening of multi-phase steels

Effects of the stress state on plastic deformation and ductile failure: Experiment and numerical simulation using a newly designed tension‐shear specimen