Abstract:The strain rate effect can inevitably impact the seismic responses of reinforced concrete (RC) structures because the dynamic properties of RC materials under earthquakes change significantly with the time-varying loading rates. This paper carries out systematic experimental tests and numerical simulations to investigate the effects of strain rates on the seismic responses of RC structures. The dynamic properties of micro-concrete and iron wire used in the shaking table specimen are firstly tested under seismic loading rates and the corresponding dynamic increase factors (DIFs) are estimated based on the test data. The shaking table test of a 1/5 scaled RC structure is performed to realistically reproduce the dynamic responses of RC structures with strain rate effect. Moreover, a three-dimensional rate-dependent fiber beam-column element is developed in the ABAQUS platform to establish the finite element (FE) model of the shaking table specimen, in which the estimated DIFs for the key parameters of micro-concrete and iron wire are employed to consider the strain rate effect. Besides, the rate-independent structural FE model is also developed using the traditional beam-column element with the static RC material constitutive models. The numerical results demonstrate that the seismic responses of RC structures are overestimated when the strain rate effect is neglected. As validated by the experimental data of the shaking table test, the FE model developed using the proposed rate-dependent fiber beam-column element can yield better structural seismic response predictions in comparison with the rate-independent model.

Dynamic tests and numerical simulation of reinforced concrete beams

Experimental and Numerical Study on Dynamic Properties of Rc Beam

Effect of Loading Rate on the Dynamic Properties of Reinforced Concrete Beams

Experimental Study on the Dynamic Compressive Properties of Concrete and the Application Analysis

Effect of loading rate on reinforced concrete member

Effects of Loading Rate on Reinforced Concrete Beams

Investigation into Dynamic Properties of Damaged Plasticity Model for Concrete in ABAQUS

Effects of strain rate on reinforced concrete beam

Experimental and Numerical Investigations on Seismic Responses of Reinforced Concrete Structures Considering Strain Rate Effect

Effects of Shear Span Ratio and Shear Reinforcement Ratio on Dynamic Characteristics of Reinforced Concrete Frame Columns

Effect Of Loading Rate On Dynamic Characteristics Of Reinforced Concrete Frame Column

Dynamic Bending Behaviours of RC Beams under Monotonic Loading with Variable Rates

Numerical Simulation And Experimental Study On Dynamic Splitting Tensile Behaviour Of Concrete

Dynamic test and constitutive model for reinforcing steel

Mechanical Behavior of Reinforced Concrete under Dynamic Loading

Numerical simulation of impact tests on reinforced concrete beams

Finite Element Analysis of Failure Modes of R/C Beams Subjected to Severe Dynamic Loads

Dynamic behaviors of reinforced concrete columns under multi-dimensional dynamic loadings

A meso-scale study on dynamic shear performance and size effect of RC beams

Experimental Tests on Reinforced Concrete Columns under Multi-Dimensional Dynamic Loadings

Large-Beam Tests on Mechanical Behavior of Dam Concrete under Dynamic Loading