Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

Experimental study on a new type of tuned mass damper

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower

Experimental Studies of Tuned Particle Damper: Design and Characterization

Comparative Studies on Structures with a Tuned Mass Damper and a Particle Damper

Experimental study on vibration control performance of TMD-STF damper

A novel mass damper enabled by three types of mass attachments and internal vibro impacts

A Novel Tuned Liquid Mass Damper for Low-Frequency Vertical Vibration Control: Model Experiments and Field Tests

A Double-Tuned Pendulum Mass Damper Employing a Pounding Damping Mechanism for Vibration Control of High-Rise Structures

Seismic performance of soft soil foundation with a new type of assembled wall tuned mass damper

Semi-analytical analysis on free vibration of cantilever beam with particle damping based on multiscale method

A Model Of Tuned Particle Damper

Experimental Study of the Semi‐active Control of Building Structures Using the Shaking Table

Shaking table test study of a RC frame with viscous damper

Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review

A Novel Assembled Pendulum-Type ATMD for Structural Vibration Control

Vibration attenuation performance of wind turbine tower using a prestressed tuned mass damper under seismic excitation

Development and Vibration Control of Frequency Adjustable Tuned Mass Damper Based on Magnetorheological Elastomer

Study on an Improved Variable Stiffness Tuned Mass Damper Based on Conical Magnetorheological Elastomer Isolators

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device