Optimization of clutch vibration isolation performance based on trouble shooting for reducing abnormal noise during vehicle accelerating

Wen-bin SHANGGUAN,Ruo-yuan ZHENG,Tao SUN,Jian-yun XIE,Shan-nan WANG,Qiu-feng HOU

DOI: https://doi.org/10.13465/j.cnki.jvs.2015.19.018

2015-01-01

Abstract:In order to analyze the performance of torsional vibration reduction for a clutch based on trouble shooting for reducing abnormal noise during vehicle accelerating,an engine-clutch-gearbox-vehicle body nonlinear dynamic model with 3-DOF was established.The input and output rotating speeds of the clutch were calculated using the developed model if the torque fluctuation of the flywheel was assumed,so the attenuation rate for the clutch's torsional vibration could be estimated directly.An abnormal noise in the cabin of a passenger car was received during accelerating the car with a gearbox and the engine speed was in the range of 1700 r/min to 2500 r/min.To reduce the noise,an optimization model was presented by maximizing the attenuation rate of the clutch within the rotating speed of 1700 r/min to 2500 r/min and taking the torsional stiffness and damping of the clutch as design variables.After installing the optimized clutch in the car, the noise at the engine compartment and that at the cabin and the vibration at the bracket of transmission mount were measured and compared with those using the original clutch.The test demonstrated that the noise and vibration are reduced greatly with the optimized clutch.The proposed model and the calculated results provided a guide for improving vibration isolation performance of clutches.