Abstract:A ceramic/composite add-on armour system with innovative ceramic geometry (cylindrical) against 14.5×114 mm API/B32 projectile was developed and ballistic performance of the armour was investigated both experimentally and numerically. Numerical analysis was used to calculate exit velocities of the projectile after passing through the ceramic/composite layer (before penetrating the Armox 500T which simulates hull structure of an armoured vehicle) and also contributed to the selection of optimum ceramic thickness. The calculated projectile velocity-time curves (from numerical analysis) for three different ceramic thicknesses are given comparatively in the study. The curve characteristics are the same for three different analyses. The duration of the total absorption of the projectile energy is about 0.2 microseconds (ms). There were differences in the transmission of the stress wave and the delamination in the Ultra-High-Molecular-Weight Polyethylene (UHMWPE) layers differed as ceramic thickness increases. The separation between the layers varied with the change in projectile energy. As a result of the ballistic test, the armour prevented 14.5×114 mm API/B32 ammunition with desired damage mechanisms. In the x-ray image taken after the shootings, it was seen that the ceramic damage was local which enhanced multi-hit resistance capability and the geometry of the cylindrical alumina played an important role in the localization of the ceramic zone damage during the projectile penetration process. Due to this cylindrical ceramic geometry, the projectile moving on after the moment of impact constantly encounters a curved and new surface, and thus it is deflected and exposed to more wear. The areal density of the armour was also reduced by using the UHMWPE (which is one of the composite material whose fibres have the lowest density and good mechanical properties) composite plate as the backing plate.

Experimental investigation on aluminum bumper with ceramic surface coating impacted by an aluminum sphere

Study on Anti-Penetration Performance of Semi-Cylindrical Ceramic Composite Armor against 12.7 mm API Projectile

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Protection performance of aluminum matrix ceramic ball composite materials plate for hypervelocity impact based on FE-SPH adaptive method

Mechanisms of failure of aluminium-based Whipple shields under hypervelocity impact: insights from continuum simulations

Enhanced bi-layer mosaic armor: experiments and simulation

Experimental and Numerical Investigation of the Ballistic Response of Alumina 99.7% Covered with Aluminum 6061-T6 Face Sheets

Numerical simulation of the penetration resistance of ceramic composite armor with corrugated structure

Quenching Numerical Simulation of Aluminum Alloy Bumper Anticollision Beam

A Novel Multi-Scale Ceramic-Based Array (SiCb+B4Cp)/7075Al as Promising Materials for Armor Structure

Ballistic Behavior of Oblique Ceramic Composite Structure against Long-Rod Tungsten Projectiles

Low-speed finite element frontal impact analysis on aluminum alloy bumper made of 6063-T6

Dynamic properties of zirconia ceramic bullets under high speed impact

Coupling Effect of Brittle Projectiles and Ceramic Composite Armor with Different Backings

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

Design of an add-on ceramic composite armour against 14.5x114 mm API/B32 projectile for the armoured vehicles and investigation of the ballistic performance of the armour

Experimental and Numerical Analysis of a Car Body Shield Loaded with a Ballistic Impact

Effect of Lode angle and projectile diameter on the ballistic resistance of 6061-T651 aluminum alloy plates struck by hemispherical nosed projectile

The effect of ceramic column shape on the ballistic performance of the SiC/UHMWPE composite armor-Numerical simulation