Abstract:The aim of this article is twofold: first, to compare the performance of R410A with that of R32, which is considered a possible HFC substitute with lower global warming potential (675 instead of 2088); second, to exploit the effect of the circuit length in the finned coil of a packaged air-to-water reversible unit with given water plate heat exchanger and scroll compressor. Both scopes are pursued through the analysis of a case study, a system with nominal cooling capacity of about 74 kW at 35°C dry-bulb outdoor air temperature and a nominal heating capacity of about 70 kW at 2°C dry-bulb and 1°C wet-bulb ambient temperature. The performance of the two refrigerants inside a “real” machine is simulated by means of an advanced numerical model of a packaged reversible refrigeration unit. The system consists of a single refrigerating circuit with two identical scroll compressors. The compressor was characterized by its experimental performance curve according to Standard EN 12900 (EN 2013a) for both R410A and R32. Off-the-shelf copper tubes and louvered aluminum fins were considered for the condenser and typical brazed-plate heat exchanger for the evaporator of the chiller configuration. The finned coil heat exchanger was first thermodynamically optimized for R410A and R32 for both condenser and evaporator operation with regard to the number of internal circuits according to the total temperature penalization performance evaluation criteria (Cavallini et al. 2010; Brown et al. 2013), without changing the overall heat exchanger dimensions. The effect of finned coil circuit length on the performance of the investigated reversible unit with the two refrigerants was then analyzed at nominal design conditions and under a seasonal perspective. Based on the modeling work, it is possible to conclude that R32 system efficiency performance is acceptable as alternative to R410A for packaged air-to-water reversible unit.

Optimal Performance Research of Frost-free Air-cooled Refrigerator with Microchannel Condenser

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

An Experimental Investigation on A Novel Ejector Enhanced Refrigeration Cycle Applied in the Domestic Refrigerator-Freezer

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

Performance investigation of a domestic freezer with micro-bare-tube evaporators

EXPERIMENTAL STUDY ON PERFORMANCES OF A NEW COMPRESSION-ABSORPTION HYBRID REFRIGERATION SYSTEM DRIVEN BY LOW-GRADE ENERGY

Research on Air-Duct Optimization and Temperature Uniformity Analysis of Domestic Frost-Free Refrigerator-Freezer

Theoretical Investigation and Comparative Analysis of the Linde–Hampson Refrigeration System Using Eco-Friendly Zeotropic Refrigerants Based on R744/R1234ze(Z) for Freezing Process Applications

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Advancements in Household Refrigeration: Evaluating Cooling Efficiency and Sustainability through Innovative Technologies

Numerical Simulations of a Micro-Channel Wall-Tube Condenser for Domestic Refrigerators

Performance Improvement of Microchannel Heat Exchangers with Modified Louver Fins under Frosting Conditions

Experimental investigation on frosting performance of a microchannel heat exchanger in heat pump system for electric vehicles

Energy efficiency of a reversible refrigeration unit using R410A or R32

Performance Enhancement Analysis of Environmentally Friendly Refrigerants