Abstract:Temperature is an important parameter for assessing the thermal radiation damage of the ammunition. After the detonation of the ammunition will compress the surrounding air in a very short time and violently release a large amount of energy to the surrounding area. Along with the release of energy, ammunition media will be sharply warmed up, and the formation of the flame field, by measuring and analyzing the true temperature value of the flame field, it is possible to obtain the spatial thermal radiation damage effect of the explosion flame. Due to the explosion process's strong destructive and transient nature, the measurement of the explosion flame is mainly dependent on radiation pyrometer. In previous studies, scholars have developed corresponding radiometric devices for the measurement of the explosion flame. However, the developed devices can only measure the bright temperature field of the explosion flame at a single wavelength, a single wavelength bright temperature field cannot achieve the calculation of the true temperature value. This paper developed a multi-spectral thermal imager, the imager uses multi-amplitude spectroscopy technology that can realize the explosion flame true temperature field at the same time, different wavelengths of spectral imaging, and the use of a high-speed CCD camera for data acquisition, and finally based on multi-spectral radiometric temperature theory inverse performance of the explosion flame true temperature field. The multi-amplitude spectroscopy technology is accomplished by the long-range multi-aperture spectroscopy lens, divided into two main parts: the main imaging lens and the multi-aperture spectroscopy lens. The function of the main imaging lens is to image the long-range ammunition explosion field, the image which converges through a single convex lens to the rear of the multi-aperture spectroscopy lens. The multi-aperture spectroscopy lens has a built-in spectral light bar, the light bar can be set with different wavelength narrowband filters. When the image is through the narrowband filter on the light bar, the transmitted light will be the measured target of single-wavelength radiation energy, the use of multiple single-wavelength radiation energy can be through the multi-spectral radiation thermometry theory for the calculation of the true temperature value. In this paper, the long-range

Design of a new type of an infrared heat flux density sensor

Design and Testing of a Micro Thermal Sensor for Non-Contact Surface Defect Detection.

Development and Performance Analysis of an Atomic Layer Thermopile Sensor for Composite Heat Flux Testing in an Explosive Environment

Structure Design of Sensor for Detecting Deflagration of Trace Explosive

Application of Heat Flux Microsensor in Radiation Measurement of Blasting Field

Heat-flux Measurement Technology Based on Infrared Thermography

A novel temperature based flat-plate heat flux sensor for high accuracy measurement

Testing and evaluation of the thermal damage caused by an explosion of energetic materials

All-Ceramic Heat-Flux Sensor for Continuous Measurement under High Temperature and Harsh Environmental Conditions.

A Ceramic Heat Flux Sensor with High Sensitivity for Ultra High Temperature

Development of Multispectral Thermal Imager for Measuring the Temperature of Long-Distance Explosion Flames

The Real-Time Measurement of Explosion True Temperature

DEVELOPMENT OF AN EXPLOSIVE DETECTOR WITH A MEMS SENSOR ARRAY

Design and Performance Evaluation of a Novel Thin-Film Heat Flux Sensor

Principle and Experimental Study of a MEMS: Explosive Particle Detector

Research on Multi -Spectral Thermal Imager Explosion Flame True Temperature Field Measurment

[Research on parameters of dynamic colorimetric temperature sensor and it's application to fuel air explosion temperature field detection]

High-Temperature Heat Flux Sensor Based on Tungsten–Rhenium Thin-Film Thermocouple

[Development of Multi-Spectral Thermometer for Explosion Flame True Temperature Measurement].

Sensitive Element Design of Transient Thin Film Heat Flux Sensor with Large Range

Research on thermal protection of piezoelectric pressure sensor for shock wave pressure measurement in explosion field