Abstract:Accurate measurement of heat flux (HF) is significant in both industrial engineering and scientific research. It is acknowledged that the radiative HF can be easily determined by radiometers. In order to measure the conductive or convective HF distribution flowing across a surface, this paper presents a novel non-contact measuring method based on the infrared (IR) technique and inverse heat transfer method (IHTM). In addition, a specially designed multi-color-reference (MCR) which is composed of four sectors with four different known emissivity will be attached to the focused surface in the practical measurement. Therefore, different radiation signals among the four different sectors of MCR as well as the focused surface will be detected by an IR camera, through which a whole radiation temperature map can be obtained. Based on the differences in the radiation temperatures of the surface and MCR, the IHTM can be adopted to yield useful boundary conditions such as emissivity of the surface, convective heat transfer coefficient, and the critical HF distribution. The measuring method presented in this study combines the advantages of contact and non-contact measurement, which can accurately obtain the HF distribution under the difficult-contacted conditions such as the HF monitoring of a boiling furnace, HF estimating of the aerodynamic heating surface, etc. Numerical simulation and experimental verification were organized to justify the newly-developed measuring method. Relative error in the simulation is estimated to be less than 2%, and that in the experiment is calculated to be around 4.23%. The result displays a relatively high precision of the measuring method, demonstrating that such a method can be applied in practical application. (C) 2018 Elsevier Ltd. All rights reserved.

Heat-flux Measurement Technology Based on Infrared Thermography

Numerical Investigation and Experimental Validation of an Infrared Measurement Approach for Surface Heat Flux Distribution Using a Multi-Color-reference

RESEARCH ON THE TRANSIENT RADIANT HEAT FLOW METER

Infrared Thermography to Measure Heat Transfer of a Heated Curved Thin Sheet

Experimental Study on Flame Temperature Measurement by Infrared Thermography

Analysis of Infrared Temperature Measurement for Flue Gas Shielding Metal Surface Using Source Multi-Flux Method

Study on the flame temperature measurement by infrared emission absorption technology

An inverse method for flue gas shielded metal surface temperature measurement based on infrared radiation

Measurements Of Surface Temperature And Heat Transfer Using A Fluorescence Imaging System Based On Thermographic Phosphors

Research on the technique of accurately measuring temperature with infrared thermal imagers

Theoretical Fast Non-Intrusive 3-D Temperature Distribution Measurement Within Scattering Medium from Flame Emission Image Analysis

Multidimensional high-temperature field measurement method for flame based on near infrared radiation spectrum of water vapor

An Investigation on the Flow Measurement of High-temperature Vapor Based on Theory of Heat Transfer

3-D Temperature Measurement In A Walk Beam Furnace Based On Radiation Image Processing Technique

Long-duration Heat Load Measurement Approach by Novel Apparatus Design and Highly Efficient Algorithm

Modeling Analysis and Experimental Study of a Temperature-difference Type Heat Flux Meter

Induced Infrared Thermography: Flow Visualization of Indoor Airflow over Heating Surface

Developing and Application of Household-based Heat Metering Base on Flux Temperature-coefficient Method

A novel temperature based flat-plate heat flux sensor for high accuracy measurement

Investigation of Heating Characteristics of Domestic Gas Cookers Via a Methodology of Infrared Thermography

Investigation into the use of thermoelectric modules as an alternative to conventional fluxmeters: Application to convective and radiative heat flux in buildings