Abstract:Developing advanced electrochemical double-layer supercapacitors (EDLCs) with high energy density and capacitance can be realized by exploring the electrodes possessing large specific surface area and high electronic conductivity. Here, we fabricated rambutan-like activated carbon sphere/carbon nanotube (ACS/CNT) composites which can be used as electrode materials in EDLCs. Curved CNTs have a polycrystalline structure with tens of nanometers in diameter and hundreds of nanometers in length and are uniformly grown on the surface of the ACS. The unique three-dimensional (3D) microstructure contributes to the ideal electrochemical performance of composite electrodes by combining high specific surface area and superior electrical conductivity. The specific capacitance of the ACS/CNT composite is 180 F/g, which is over threefold that of the pristine ACS electrode at a current density of 2.5 A/g. ACS/CNT electrodes exhibit an excellent cyclical ability at 10 mV/s sweep rate in the working voltage range, and the capacitance retention is almost 80% after 1000 cycles. The preparation of 3D microstructure opens up a new way of designing electrodes with a 3D conductive network and lays the foundation for the development of lightweight energy storage supercapacitors.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00189?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00189</a>.Morphology and microstructure of the rambutan-like composite; N2 adsorption isotherms and the BJH pore size distributions of the ACS and ACS/CNT composite with different CNT proportions; comparison of galvanostatic charge/discharge times in the discharge process between the pristine ACS and ACS/CNT composite electrode; rate capability of the ACS/CNT composite electrode at current densities of 0.25, 0.60, 1.25, 2.50, and 5.00 A g–1 in the range 0.01–0.4 V; cycling life of the ACS/CNT composite electrode used in a supercapacitor in the range 0.01–0.4 V; cycling life of the ACS/CNT composite electrode used in a supercapacitor in the cutoff voltage range 0.01–1.0 V at a current density of 0.125 A/g; corresponding size distribution of the ACS, nickel catalyst and CNTs grown on the surface of the ACS in the following preparation process; analysis parameters of the EELS C k edge with a fitting range of 120 eV and signal being extracted from 279 eV; Raman spectra of the ACS/CNTs and the ACS samples; specific surface area and pore volume for the ACS/CNTs and the ACS samples; and comparison of specific capacities of various carbon materials as supercapacitor electrode materials (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00189/suppl_file/ef1c00189_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Carbonized Carbon Nanotubes Composite Paper Used for Supercapacitor Electrode

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

Binder-free Activated Carbon/carbon Nanotube Paper Electrodes for Use in Supercapacitors

Synthesis and Characterization of Ni/CNTs Electrodes and Their Supercapacitors Performance

Nitrogen, Boron and Fluorine Tri-Doped Carbon Nanotubes on Carbon Cloth As the Electrode Materials for Supercapacitors

Fabrication of Carbon Nanotubes/Polypyrrole/Carbon Nanotubes/Melamine Foam for Supercapacitor

Preparation and Electrochemical Properties of NiCo2S4@Carbon Nanotube Constructed Flexible Film Electrode for Supercapacitors

Mesoporous Carbon Nanofibers for Supercapacitor Application

Synthesis, Characterization and Electrochemical Study of Carbon Nanotube/Chitosan-Ferrocene Nanocomposite Electrode as Supercapacitor Material

Activated Carbon Modified by CNTs/Ni-Co Oxide As Hybrid Electrode Materials for High Performance Supercapacitors

Synthesis of Multiporous Carbon Nanofibers and Their Application in Supercapacitors

Synthesis of Nitrogen-Doped Porous Carbon Nanofibers As an Efficient Electrode Material for Supercapacitors.

Carbon Nanotube/Polyaniline/Graphene Composite Paper and Its Electrochemical Capacitance Behaviors

Facile Synthesis of NiCo2S4/CNTs Nanocomposites for High-Performance Supercapacitors.

Fabrication of Rambutan-like Activated Carbon Sphere/Carbon Nanotubes and Their Application as Supercapacitors

Facile synthesis and modification of Fe 2 O 3 nanorod arrays on carbon paper as efficient negative electrodes for supercapacitors

Spinning of Carbon Nanofiber/Ni–Cu–S Composite Nanofibers for Supercapacitor Negative Electrodes

A novel cobalt hexacyanoferrate/multi-walled carbon nanotubes nanocomposite: Spontaneous assembly synthesis and application as electrode materials with significantly improved capacitance for supercapacitors

Design of NiCo 2 O 4 nanoparticles in-situ grown on lignin-derived porous carbon and MWCNTS composites for supercapacitors

Facile Preparation of Carbon Nanotubes/Cellulose Nanofibrils/Manganese Dioxide Nanowires Electrode for Improved Solid-Sate Supercapacitor Performances

Fabrication of Multi‐Layered Paper‐Based Supercapacitor Anode by Growing Cu(OH)2 Nanorods on Oxygen Functional Groups‐Rich Sponge‐Like Carbon Fibers