Abstract:Magnesium alloys show great promise in high-speed transport, aerospace, and military technology; however, their widespread adoption encounters challenges attributed to limitations such as poor plasticity and strength. This study examines the high-temperature deformation of semi-solid forged AZ91D magnesium alloy through a combination of experiments and simulations, with a focus on comprehending the influence of deformation conditions on dynamic recrystallization (DRX). The findings disclose that conspicuous signs of DRX manifest in the yield stress curve as strain increases. Additionally, decreasing the strain rate and temperature correlates with a reduction in both yield stress and peak strain, and the activation energy is 156.814 kJ/mol, while the critical strain and peak strain remain relatively consistent (εc=0.66208εp). Microstructural changes during high-temperature deformation and the onset of DRX are thoroughly examined through experimental methods. Moreover, a critical strain model for DRX and a predictive model for the volume fraction of DRX were formulated. These equations and models, validated through a combination of experiments and simulations, serve as invaluable tools for predicting the mechanical behavior and microstructural evolution, which also establishes a foundation for accurately predicting the deformation behavior of this alloy. By analyzing the hot deformation characteristics and dynamic compression mechanism of the newly developed semi-solid forging AZ91D magnesium alloy, a numerical simulation model can be effectively established. This model objectively reflects the changes and distributions of stress, strain, and rheological velocity, providing a scientific basis for selecting subsequent plastic deformation process parameters and designing mold structures.

Development of Deformation Magnesium Continue Roll Cast

Recent research and advances in extrusion forming of magnesium alloys: A review

Asymmetric Extrusion Technology of Mg Alloy: A Review

Uncovering the influence of deformation amount on microstructure evolution and mechanical behavior of the multi-DoF formed WE43 magnesium alloy

Consideration of Castability and Formability for New Magnesium Alloys

Magnesium Alloy Characteristics and Developments of Its Plastic Forming Technology

Recent research and development on forming for large magnesium alloy components with high mechanical properties

Review on forming process of magnesium alloy characteristic forgings

Deforming magnesium alloy and preparation method thereof

Research progress on semi-continuous casting of magnesium alloys under external field

Status of Study on Magnesium Alloy Sheet Deep Drawing Technique

Developments of Wrought Mg Alloys

Review on Forging Forming Technology of Magnesium Alloy

Additive Manufacturing of Magnesium and its alloys: Process-Formability-Microstructure-Performance Relationship and Underlying Mechanism

Plastic deformation mechanism and hardening mechanism of rolled Rare-Earth magnesium alloy thin sheet

Deformation mechanisms and mechanical properties of the high-strength and ductile Al-Zn-Mg-Cu alloys processed by repetitive continuous extrusion forming process with different heat treatments

Finite Element Simulation and Experimental Investigation on Homogeneity of Mg-9.8Gd-2.7Y-0.4Zr Magnesium Alloy Processed by Repeated-Upsetting

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Semi-Solid Forged AZ91D Magnesium Alloy

New Technique of Casting-rolling Strips for Semi-solid Magnesium Alloys

Research Status and Development Tendency on High Strength Wrought Magnesium Alloys