Abstract:Magnesium alloys are widely used in various fields because of their outstanding properties. High-pressure die casting (HPDC) is one of the primary manufacturing methods of magnesium alloys. During the HPDC process, the solidification manner of casting is highly dependent on the heat transfer behavior at metal-die interface, which directly affects the solidified microstructure evolution, defect distribution and mechanical properties of the cast products. As common solidified microstructures of die cast magnesium alloys, the externally solidified crystals (ESCs), divorced eutectics and primary dendrites have important influences on the final performance of castings. Therefore, investigations on the interfacial heat transfer behavior and the solidified microstructures of magnesium alloys have considerable significance on the optimization of die-casting process and the prediction of casting quality. In this paper, recent research progress on theoretical simulation and experimental characterization of the heat transfer behaviors and the solidified microstructures of die cast magnesium alloys was systematically presented. The contents include: (1) A boundary-condition model developed based on the interfacial heat transfer coefficients (IHTCs), which could precisely simulate the boundary condition at the metal-die interface during solidification process. Accordingly, the IHTCs can be divided into four stages, namely the initial increasing stage, the high value maintaining stage, the fast decreasing stage and the low value maintaining stage. (2) A numerical model developed to simulate and predict the flow patterns of the externally solidified crystals (ESCs) in the shot sleeve during mold filling process, together with discussion on the influence of the ESCs distribution on the defect bands of die cast magnesium alloys. (3) Nucleation and growth models of the primary alpha-Mg phases developed by considering the ESCs in the shot sleeve. (4) Nucleation and growth models of the divorced eutectic phase, which can be used to simulate the microstructure evolution of die cast magnesium alloys. (5) The 3D morphology and orientation selection of magnesium alloy dendrite. It was found that magnesium alloy dendrite exhibits an eighteen-primary branch pattern in 3D, with six growing along < 11(2)over bar0 > in the basal plane and the other twelve along < 11(2)over bar3 > in non-basal planes. Accordingly, an anisotropy growth function was developed and coupled into the phase field model to achieve the 3D simulation of magnesium alloy dendrite.

Research progress on semi-continuous casting of magnesium alloys under external field

Current Research and Future Prospect on Microstructures Controlling of High Performance Magnesium Alloys During Solidification

Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

The simultaneous application of variable frequency ultrasonic and low frequency electromagnetic fields in semi continuous casting of AZ80 magnesium alloy

The role of different electromagnetic fields in magnesium alloys direct-chill casting: Numerical simulation and experimental investigation

Application of electromagnetic metallurgy in continuous casting: A review

A review of electromagnetic stirring on solidification characteristics of molten metal in continuous casting

Effect of Electromagnetic Power on the Microstructure and Properties of 2219 Aluminum Alloy in Electromagnetic Continuous Casting Technology

New Technique of Casting-rolling Strips for Semi-solid Magnesium Alloys

Research on Magnetic Floating Horizontal Continuous Casting Process (MFCC) for Nearly Net-Shape Molten Metal Afterheat Billet

Study on Semi-Solid Magnesium Alloys Slurry Preparation and Continuous Roll-Casting Process

Recent research and development on forming for large magnesium alloy components with high mechanical properties

Recent progress on cast magnesium alloy and components

Recent research and advances in extrusion forming of magnesium alloys: A review

Research on the Influence of Die Casting Process on Structure and Performance of Magnesium Alloy

Electromagnetic Forces in Continuous Casting of Steel Slabs

Research situation and prospect of influence of electromagnetic field on the solidification structure of aluminum and magnesium alloys

Characterization and Modeling Study on Interfacial Heat Transfer Behavior and Solidified Microstructure of Die Cast Magnesium Alloys

Study on Processing Conditions for Semi-Solid Forging of Magnesium Alloys

Inhomogeneity of microstructure and mechanical properties of a 500 mm diameter heavy section semi-continuous cast AZ61 magnesium alloy ingot

Study on the Externally Solidified Crystals in the Microstructure of Cold chamber High Pressure Die Casting Magnesium Alloy