Abstract:Current flexible/compliant tactile sensors suffer from low sensitivity and high hysteresis introduced by the essential viscosity characteristic of soft material, either used as compliant sensing element or as flexible coverage. To overcome these disadvantages, this paper focuses on developing a tactile sensor with a smart hybrid structure to obtain comprehensive properties in terms of size, compliance, robustness and pressure sensing ability so as to meet the requirements of limited space applications such as prosthetic fingertips. Employing micro-fabricated tiny silicon-based pressure die as the sensing element, it is easy to have both small size and good mechanical performance. To protect it from potential damage and maintain the compliant surface, a rigid base and a soft layer form a sealed chamber and encapsulate the fixed die together with fluid. The fluid serves as highly efficient pressure propagation media of mechanical stimulus from the compliant skin to the pressure die without any hazard impacting the vulnerable connecting wires. To understand the pressure transmission mechanism, a simplified and concise analytic model of a spring system is proposed. Using easy fabrication technologies, a prototype of a 3 x 3 sensor array with total dimensions of 14mm x 14mm x 6.5mm was developed. Based on the quasi-linear relationship between fluid volume and pressure, finite element modeling was developed to analyze the chamber deformation and pressure output of the sensor cell. Experimental tests of the sensor prototype were implemented. The results showed that the sensor cell had good sensing performance with sensitivity of 19.9 mV N-1, linearity of 0.998, repeatability error of 3.41%, and hysteresis error of 3.34%. The force sensing range was from 5 mN to 1.6 N.

The Effects of Design Parameters on the Sensitivity of Fingertip's Force Transducers Based on Stewart Platform

Six-axis Force/Torque Sensor Based on Stewart Platform

Analysis of Sensitivity for Six-Axis Force/Torque Sensor Based on Stewart Platform Sensor Based on Stewart

The design and applications of F/T sensor based on Stewart platform

Force Sensitivity Analysis And Scale Design Of Stewart Parallel Manipulator

Method of Designing a Six-Axis Force Sensor for Stiffness Decoupling Based on Stewart Platform

Study on the Influence of Structural Parameters of Multi-Dimensional Force Sensor on Test Sensitivity

Configuration And Isotropy Study Of A Novel Fully Pre-Stressed And Double-Layer Six-Component Force/Torque Sensor

STUDY OF OPTIMAL DESIGN AND LEG INERTIA EFFECT IN LARGE HYDRAULIC STEWART PLATFORM

Design of Fingertip Pressure Sensors for Prosthetic Hands

Design and analysis of parallel six-dimensional force sensor based on near-singular characteristics

Design and analysis of a novel isotropic six-component force/torque sensor

Optimal Design of Stewart Platforms Based on Expanding the Control Bandwidth While Considering the Hydraulic System Design

Liquid Metal-Based Wearable Tactile Sensor for Both Temperature and Contact Force Sensing

Development of Wearable Tactile Sensor Based on Galinstan Liquid Metal for Both Temperature and Contact Force Sensing.

Dsign of a New Typed Six-Component Wrist Force Sensor of Robot with 3-2-1 Orthogonal Structure

Design of Six-Axis Force Sensor and Analysis of Its Experimental Data

Smart structure with elastomeric contact surface for prosthetic fingertip sensitivity development

A Mechatronic Platform for Studies of Tactile Sensory System on Prosthesis Hand

Design and optimization of a novel six-axis force/torque sensor with good isotropy and high sensitivity

Study of Torque Isotropy of Six-dimensional Force Sensor Based on Stewart Structure