Abstract:A common practice in the dynamic analysis of the vehicle-bridge system is to determine the contact behavior between all the wheelsets and the bridge elements,which becomes particularly complex when developing the dynamical coupling model between the mixed train and the multi-span bridge carrying multiple rail-lines.It is assumed that all the wheelsets keep in contact with the bridge.By introducing a window function of time,a general relationship between the state variables of the wheel-set and bridge can be derived,through which the dynamic property matrices for the moving mass beam is proposed.The subsystem above the primary suspension of the vehicle can be regarded as an independent multi-body system.By combining the moving mass beam model and the multi-body model for vehicles,a universal model is therefore presented for analyzing the coupled vertical vibration responses of the mixed train and the multi-span simply supported bridges bearing twin rail-lines.Based on the iteration formula for the state variables of the Newmark-β method,a dimension-reducing algorithm is developed to minimize the computational efforts.The present procedure has been justified by comparing the results with what is given in the literatures and is demonstrated by calculating the dynamic responses of a three-span simply supported box-girder bridge with twin lanes subjected to high-speed train.It is found that the maximum vertical displacement of the car body of each vehicle satisfies fixed proportions as compared with other responses between the results of the single-line and the double-line vehicle-bridge interactions.The maximum responses at the mid-point of each bridge span remain nearly the same in the operation of single-line vehicles.As a comparison to the results of single-line analysis,the maximum vertical displacement at the mid-point of the central bridge span approximately magnifies two times,while the maximum vertical accelerations at the mid-point of a eccentrically loaded bridge span decrease in the double-line analysis.

Coupling vibration analysis of passenger-vehicle-bridge system

FEM analysis of vehicle-bridge vibration considering bridge deck's vibration

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Calculation method for human-bridge vertically coupled vibration

Dynamic Response and Riding Comfort Analysis of a Passenger-Train-Bridge System in Urban Rail Transit

Nonlinear Dynamic Analysis of Multi-vehicle Vehicle-bridge Coupling System

Theoretical Analysis and Experimental Study of Vehicle-Bridge Coupled Vibration for Highway Bridges

Dynamic Analysis of Coupled Vehicle-Bridge System with Uniformly Variable Speed

Model of Highway Bridge Subjected to Vehicle-bridge Coupled Vibration Based on LS-DYNA

Ride comfort of the bridge-traffic-wind coupled system considering bridge surface deterioration

Numerical Solution Method for Analysis of Coupled Multi Axle Vehicle-Bridge Vibration Response

Research and Analysis on State of Vehicle-bridge Vibration Problem

Dynamic response analysis of vehicle-bridge coupled systems considering separation

Dynamic Analysis on Coupled Vehicle-bridge System by Modal Synthesis Method

An interactive method for the analysis of the simulation of vehicle–bridge coupling vibration using ANSYS and SIMPACK

Vehicle-bridge Coupled Vibration Based on the Patch Contact

Coupling dynamic analysis of vehicle/bridge of urban mass transit continuous rigid frame bridge

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Vertical vibration analysis of coupled mixed vehicles and multi-span simply supported twin-line railway bridges using the moving mass beam formulation