Abstract:The active controls of structures are always realized by controlling a few major modes. The assumed modal method can be used to establish a low-order motion equation to reduce modes, but it is difficult to find a suitable assumed mode for the entire system. Moreover,although the solution precision of the finite element method is higher, the greater number of freedom degrees can affect the subsequent computation efficiency. Based on the finite element analysis on the vibration mode of the stator in an ultrasonic motor,this paper presents a modal truncation method to reduce the dimension of the finite element model and to reserve the special modes. By taking a stator in the travelling rotory ultrasonic motor TRUM as an example,the ANSYS Parametric Design Language(APDL) is used to recognize the working mode automatically, to extract the electrical parameters of equivalent circuit model and to calculate the mechanical and electrical responses simulatively. The dynamic properties of the structure are simulated and tested with a laser Doppler vibrometer. Comparing with experiment results of the working mode frequency, the relative error is 9.1% to the assumed modal method, and 0.3% to the finite element method. For the stable response, the relative error between the observation and the calculation of the modal truncation method is 3%. It is shown that the acquisition method of modal parameters is effective and the modal parameters reflect the actual motion state of the free stator more precisely than that of the assumed modal method.

Modeling of the stator of the traveling wave rotary ultrasonic motor based on substructural modal synthesis method

Modeling of Stator of a Traveling Wave Rotary Ultrasonic Motor Based on Semi-analytical Method

Dynamic Analysis of Composite Stator of Ultrasonic Motor Based on Substructure Interface Loading Theory

Modeling and tests for a stator of a traveling-wave type spherical ultrasonic motor with 2-DOF

Optimization research of stator with two degree-of-freedom traveling-wave spherical ultrasonic motor

Study on Analytical Modeling of the Stator of Longitudinal and Torsional Hybrid Type Ultrasonicmotor

Motor Stator Modeling and Equivalent Material Parameters Identification for Electromagnetic Noise Calculation

Analytical modeling of stator vibration for surface mount permanent magnet brushless motors

Study on the Modal Disturbance of Traveling Wave Type Rod Shape Ultrasonic Motor Stators

Research on dynamic model of traveling wave type ultrasonic motor

Modeling and Optimal Design of the Rotary-Linear Type Two-Degree-of-Freedom Ultrasonic Motors

An Efficient Approach to Optimize the Vibration Mode of Ultrasonic Motors

Dynamic Analysis and Performance Simulation of a Traveling Wave Type and Rod Shape Ultrasonic Motor

Stator FEM Modeling of Permanent Magnet Synchronous Motor for Electric Vehicle Driving Based on Structural Vibration Analysis

The Driving Mathematic Model of Spherical Traveling-wave Type Ultrasonic Motor

Kinetic Model of Three Degree-of-Freedom Traveling Wave Type Ultrasonic Motor

Dynamic and Kinetic Analyses of the Stator of A Cylindrical Ultrasonic Motor

Contact Analysis and Modeling of Standing Wave Linear Ultrasonic Motor

Modal truncation to vibration analysis of stator in ultrasonic motor

Analysis of Influencing Factors on Stator's Vibration Characteristics and Optimization Design of Drive Motor

Contact Mode and Force Transferring Model of Cylindrical Ultrasonic Motors with Bending Vibration Modes