Abstract:Na0.67Ni0.33Mn0.67O2 (NNMO) exhibits high energy density and reversible capacity and hence is considered a promising cathode material for sodium-ion batteries (SIBs). However, the dissolution of transition metal (TM) ions results in poor cycling performance due to structural destruction. A robust and dense cathode electrolyte interlayer can be formed at the interface between the cathode and the electrolyte to effectively maintain the structure stability of the cathode. Therefore, employing small doses of organic molecules as functional electrolyte additives to form a stable interface between the electrolyte and electrodes is one of the most promising approaches to commercializing SIBs. Herein, lithium difluoro(oxalate)borate (LiDFOB) at different concentrations was added to an electrolyte to improve the rate performance and cycling stability of the cathode during the charge-discharge process by inhibiting structural damage. Results demonstrate that adding 0.8 wt% LiDFOB to a baseline electrolyte is desirable as it decomposes to form a firm and thin cathode-electrolyte interface (CEI) that inhibits the dissolution of TM ions. In addition, it was found to inhibit the decomposition of NaPF6 and decrease the content of hydrogen fluoride (HF), thus preventing the erosion of the surface of cathode materials. The poor cycling stability of NNMO//Na half-cells in the baseline electrolyte led to a capacity retention of only 33.3% after 100 cycles at 1C. In contrast, the NNMO//Na half-cell containing 0.8 wt% LiDFOB showed prominent electrochemical properties, with a high capacity retention of 79.8% by maintaining a specific capacity of 93 mA h g-1 after 300 cycles at 1C. The NNMO//hard carbon full cell containing 0.8 wt% LiDFOB exhibited a specific capacity of 136.59 mA h g-1 and a specific energy density of 432.79 W h kg-1 at a current density of 0.1C. It maintained 99.7% capacity at 1C after 700 cycles. This work is expected to provide useful insights into the addition of LiDFOB as a potential approach to solve the challenge of poor structural stability of NNMO during cycling.

Compatibility of LiODFB Electrolyte with LiNi0.5Mn1.5O4 As High-voltage Cathode Material

LiPF 6 and Lithium Difluoro(oxalato)borate/ethylene Carbonate+dimethyl Carbonate +ethyl(methyl)carbonate Electrolyte for LiNi 0.5 Mn 1.5 O 4 Cathode

Enhanced Performance of the Electrolytes Based on Sulfolane and Lithium Difluoro(oxalate)borate with Enhanced Interfacial Stability for LiNi 0.5 Mn 1.5 O 4 Cathode

Enhanced Electrochemical Performance of LiNi0.5Mn1.5O4 Cathode by Application of LiPF2O2 for Lithium Difluoro(oxalate)borate Electrolyte

Lithium difluoro(oxalato)borate/ethylene carbonate + propylene carbonate + ethyl(methyl) carbonate electrolyte for LiMn2O4 cathode

Lithium Difluoro(Oxalate)Borate and Libf4 Blend Salts Electrolyte for Lini0.5mn1.5o4 Cathode Material

Structure Characterization and Electrochemical Properties of New Lithium Salt LiODFB for Electrolyte of Lithium Ion Batteries

High and Low Temperature Performance of LiODFB Electrolyte

An electrolyte to improve the deep charge–discharge performance of LiNi0.8Co0.15Al0.05O2 cathode

Insight into wide temperature electrolyte based on lithiumdifluoro(oxalate)borate for high voltage lithium-ion batteries

Ionic liquid electrolytes with protective lithium difluoro(oxalate)borate for high voltage lithium-ion batteries

An Electrolyte to Improve the Deep Charge–discharge Performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 Cathode

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

Conductive Robust Interfaces with Fluoro-Borate Based Electrolyte Additive for 4.6 V Well-Cycled LiNi0.90Co0.06Mn0.04O2||Li Batteries

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Improving the Rate Performance and Stability of LiNi0.6Co0.2Mn0.2O2 in High Voltage Lithium-Ion Battery by Using Fluoroethylene Carbonate As Electrolyte Additive

Construction of a Stable Interface at the Na0.67Ni0.33Mn0.67O2 Cathode Using LiDFOB Electrolyte Additives for High-Performance Sodium-Ion Batteries

Ionic liquid-based electrolyte with dual-functional LiDFOB additive toward high-performance LiMn2O4 batteries

Concentrated LiODFB Electrolyte for Lithium Metal Batteries

Enhancing Compatibility Between LiNi0.8Co0.1Mn0.1O2 and LiPF6-based Electrolyte Via Bis(trimethylsilyl)oxalate Additive

Lithium difluoro(oxalate)borate as electrolyte additive to form uniform, stable and LiF-rich solid electrolyte interphase for high performance lithium ion batteries