Abstract:Magnesium (Mg) and its alloys are one of the highly sought after structural material due to its lowest density among the structural material. Various attempts are being made by researchers to improve the mechanical performance of Mg alloys to widen their scope of application domains, especially in defence and biomedical sectors. On the development of Mg matrix composites, various works are reported on adding ceramic-based reinforcement which is proven to improve the strength of the material, but at the cost of ductility. With the research attempt on developing metallic reinforcement-based Mg composites being scarce, the scope of developing such composite material with superior strength and ductility is huge. Nickel has zero-solubility in Mg, high melting point and few closely matching lattice spacing with Mg crystal, which enabled simultaneous crystallization of Mg, with Ni acting as nucleation sites, and helped refining the microstructure. In the present research work, an attempt is made to incorporate 5 Wt.% of sub-micron-Ni particulate as reinforcement in developing an AZ31 matrix composite through stir casting route. A field emission scanning electron microscope and optical microscope was used to give the detailed analysis on the microstructural evaluation of the cast AZ31 alloy and the developed composite. Elemental mapping was done to confirm the uniform distribution of Ni particles throughout the magnesium matrix. The influence of reinforcement on the mechanical properties of the composites were investigated. The composite displayed improved properties when compared to the base alloy in terms of hardness, yield strength and ultimate tensile strength. The hardness of the composite was found to be 68.4HV, whereas the base alloy had a hardness of 53HV. The ultimate tensile strength (UTS) for the AZ31/Ni composite was greater than 50% when compared with the base alloy. Fractography study revealed the type of fracture of the base alloy and the composite.

Research Progress on Particulate-reinforced Nickel-based Composites

Progress in Studies of Particle Reinforced Cu-matrix Composites

Research Progress of Nickel Based Composite

The Progress in Research on Ceramic Particulate-Reinforced Titanium Matrix Composites

Research Progress of Particulates Reinforced TiAl Based Composites

Development of Cu -Based Composites Reinforced by Particles

Research Progress of Laser Additive Manufacturing Nickel-Based Alloy Metal Matrix Composites

Progress on Ceramic Particles Reinforced Copper-matrix Composites

Synthesis and Characterization of Nanoparticulate Strengthened Nickel Microcomponents

Research and developments of ceramic-reinforced steel matrix composites—a comprehensive review

In-situ hybrid Cr3C2 and γ′-Ni3(Al, Cr) strengthened Ni matrix composites: Microstructure and enhanced properties

Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the Matrix, Reinforcement, Interface Design, Properties and Potential Applications

Role of Nickel Particulate Reinforcement on Microstructure and Mechanical Performance of AZ31 Magnesium Composite

Fabrication and Mechanical Properties of Microalloyed and Ceramic Particulate Reinforced NiAl-based Alloys

Progress of Metal/Al_2O_3 Matrix Nanocomposites

Preparing Technology, Characterization and Applications of the Particulate Reinforced Metal Matrix Composites Coatings

Research Progress on Noble Metal Composite Nanoparticles

Metal Matrix Composites Reinforced by Nano-Particles—A Review

Microstructure and mechanical properties of particulate reinforced matrix composite

Microstructure and Mechanical Properties of an Al–Ni–Co Intermetallics Reinforced Al Matrix Composite

Recent progress in particulate reinforced aluminum composites fabricated via spark plasma sintering: Microstructure and properties