Abstract:Monodispersed spheroidal SnO2 nanocrystals with the grain size of 8–30 nm were synthesized by the precipitation method using SnCl4·5H2O (stannic chloride hydrate) as raw materials. Differential scanning calorimetry/thermogravimetry (DSC/TG), X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to characterize the structure of SnO2 nanocrystals. The influences of the calcination temperature and time on the lattice constant, the lattice distortion and the grain size of SnO2 nanocrystals were discussed based on the XRD results. The grain growth kinetics of SnO2 nanocrystals during calcination process was simulated with a conventional grain growth model which only took into account of diffusion and with a new isothermal model proposed by our group, which took into account of both diffusion and surface reactions. Using conventional model, the grain growth rate constant of SnO2 crystals is 1.55×104 nm5/min with a pre-exponential factor of 5 and an activation energy of 108.62 kJ/mol. Compared with the convention model, the new isothermal model is more realistic in reflecting the grain growth behavior of SnO2 nanocrystals during the calcination process. This indicates that the grain growth of SnO2 nanocrystals is controlled by both diffusion and reaction factors, and the effect of surface reactivity on the grain growth of SnO2 nanocrystals could not be ignored. A combined activation energy estimated with the new isothermal model is 53.46 kJ/mol.

Synthesis of Cadmium Oxide (cdo) Nanocrystallite and Crystallization Kinetics During Thermal Treatment

Preparation of CdO Nanoparticles by Mechanochemical Reaction

Solid-state Synthesis of Cobalt Oxide (co3 O4 ) Nanocrystallites and Crystallization Kinetics During Thermal Treatment

Nano CaO Grain Characteristics and Growth Model under Calcination

Mechanochemical Synthesis of Cadmium-Doped Tin Oxide Nanoparticles

Mechanochemical Synthesis of Cobalt Oxide Nanoparticles

CADMIUM TELLURIDE NANOCRYSTALS: SYNTHESIS, GROWTH MODE AND EFFECT OF REACTION TEMPERATURE ON CRYSTAL STRUCTURES

Synthesis of Tin Oxide Nanoparticles by Mechanochemical Reaction

Synthesis of cadmium hydroxide nanoflake and nanowisker by hydrothermal method

Grain Growth Kinetics of SnO_2 Nanocrystals Synthesized by Precipitation Method

Mechanochemical Synthesis of In2O3/CuO Nanocomposites

Studies on the nanocrystalline Co3O4 by wet synthesis and its microstructure

Kinetic of grain growth of CeO2 nanocrystalline prepared by precipitation method

Formation of Zinc Oxide Nanoparticles by Mechanochemical Reaction

Synthesis of Co-Doped CdS Nanocrystals by Direct Thermolysis of Cadmium and Cobalt Thiolate Clusters

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Room temperature deposition of nanocrystalline cadmium peroxide thin film by electrochemical route

Tin oxide nanocrystal synthesized by mechanochemical method

SYNTHESIS OF NANOCRYSTALLINE SnO2 BY PRECIPITATION

Mechanochemical Synthesis of Zinc Oxide Nanocrystalline

Structural and magnetic properties of cadmium oxides with different annealing temperatures