Abstract:Modern prefabricated underground structures are the key advancement in the low-carbon urban construction. The rapid development of prefabricated structures has increased the diversity of assembled joints. It becomes more difficult to evaluate the joint performance considering multiple parameters, such as joint size, morphology, interface properties, and axial forces. Therefore, this study developed an assembled joints mechanical assessment model to solve the multi-parameter problems. First, the interface contact formulas were established for typical interfaces. Second, a joint interfaces contact model (JICM) was established based on the above formulas and multiple parameters. Finally, model validation and case study were performed for JICM. The results show that: (1) JICM fitted well with the experimental data, and reflected the multi-parameter effects of multi-type assembled joints. (2) JICM calculated the contact stress at the outer edge of the interfaces can be twice larger than the bending stress. Accordingly, JICM revealed the key reason for brittle damage of assembled joints. (3) JICM demonstrated promising joint design capabilities: it calculated that the bending moment contribution of one interfaces group was dominant; it further calculated the deformation and bearing capacity of the assembled joints at the yield and ultimate moments. (4) JICM demonstrated promising joint deformation control: it calculated the rotation developments of assembled joint and continuous section were not consistent; it further presented the deformation pattern of the assembled components was a folded line and can be 20% larger than that of a continuous component. JICM provides a tool for parametric design of joints and quantitatively evaluates multi-parameter effects, demonstrating practical value for urban green low-carbon construction.

An Improved Substructure Synthesis Method Based on the Identification of Joint Characteristics

Substructure Synthesis Method Considering Dynamic Behavior of Joints

An Integrated Joint Dynamics System for Elastically Jointed Structures

An Accurate Substructural Synthesis Approach to Random Responses

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

The Calculating Method and Applying Study of a Structure′s Dynamic Property

Improved sub-model analysis based on cut-boundary of multiple interpolation

Another explicit forms of dynamic substructuring approaches using dynamic constraints at joint nodes

Improving Substructure Identification Accuracy of Shear Structures Using Virtual Control System

EXACT MODAL SYNTHESIS METHOD USING MID/HIGH-ORDER SUBSTRUCTURE MODES

A Substructure Condensed Approach for Kinetostatic Modeling of Compliant Mechanisms with Complex Topology.

Mechanics Based Design of Structures and Machines

Component Mode Synthesis Method Based on Virtual Elements

A novel interfaces contact model for analyzing assembled joints of prefabricated underground structures

Application of improved hybrid interface substructure cms method in the modal analysis of mistuned bladed disk assemblies

Updating finite element model of structures with semi-rigid joints and boundary

Substructure Hybrid Simulation Boundary Technique Based on Beam/Column Inflection Points

Kinetostatic Modeling of Complex Compliant Mechanisms with Serial-Parallel Substructures: A Semi-Analytical Matrix Displacement Method

Joint Identification through Hybrid Models Improved by Correlations

A General Substructuring Synthesis Method for the Analysis of Complex Vibro-Acoustic Interaction Systems

Numerical simulation of substructure hybrid simulation test method for the scale model