Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

Flow-excited Vibration Test and Simulation Analysis of an Underwater Open Cavity

Experimental Investigation on the Cavity Evolution and Dynamics with Special Emphasis on the Development Stage of Ventilated Partial Cavitating Flow

Tests for pressure fluctuating characteristics around a ventilated underwater vehicle

Effect of the Gust Wave on the Dynamic Behavior of Cavity Closure and Pressure: A Numerical Study

Simulation On Flow Field Induced By Vibration Surface Of Low Frequency

Experimental Investigation of Pressure Distribution in Ventilated Supercavity of Underwater Vehicle Model

Experimental Investigation of Unsteady Characteristics of Ventilated Cavitation Flow Around an Under-Water Vehicle

Numerical Simulation of Pressure Distribution in Vertical Water-entry Cavity

A method to predict the flow-induced noise of an open cavity of a complex geometry

Hydroacoustic Analysis of Open Cavity Subsonic Flow Based on Multiple Parameter Numerical Models

Numerical investigation of ventilated cavitating flow from high to low cavitation numbers

Numerical and Experimental Study of Pressure-Wave Formation Around an Underwater Ventilated Vehicle

Flow Noise Characteristics Analysis of Underwater High-Speed Vehicle Based on LES/FW-H Coupling Model

Characteristics of Flow Field Around an Underwater Projectile with Natural and Ventilated Cavitation

Flow dynamics in the closure region of an internal ship air cavity

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Experimental and Simulation Study on Flow-Induced Vibration of Underwater Vehicle

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Measurement and Prediction of Cavitating Flow-Induced Vibrations

Numerical Investigation on the Hydrodynamic Performance with Special Emphasis on the Cavitation Intensity Detection in a Venturi Cavitator

Experimental Investigation of Two Ventilated Cavities with Effect of Froude Number and Gas Entrainment